Pirelli Cinturato Road TLR Cycle Tyre - 700 x 26c

The maximum pressure for the Pirelli Cinturato Road TLR on hookless rims is 5 bar (73 psi).

While versatile and offering good protection, the Cinturato Road TLR is primarily designed for road use. For rougher gravel, a tyre with more aggressive tread and higher volume may be more appropriate.

SmartNET Silica uses an anisotropic (directionally oriented) structure of silica particles that aligns to provide excellent grip while maintaining low rolling resistance for efficiency.

TLR stands for Tubeless Ready, indicating the tyre is designed to be used without an inner tube with appropriate sealant and rim setup.

The TechWALL+ is an abrasion-resistant layer applied to the casing to significantly enhance puncture resistance against cuts and abrasions, increasing the tyre's overall lifespan and reliability.

Yes, the Pirelli Cinturato Road TLR is compatible with traditional hooked rims and does not have the same 5 bar pressure limitation when used with them.

Ensure the rim bed is clean and free of debris. Use a tire lever carefully if needed to help seat the bead. Check that the rim tape is correctly applied and there are no air leaks.

Check for small punctures and ensure sufficient sealant is present. Rotate the wheel to distribute sealant to the leak. Re-inflate and monitor.

Verify tyre pressure is within the recommended range for conditions. Inspect tyre tread for wear or damage. The SmartNET Silica compound is designed for wet grip, so significant loss of grip may indicate another issue.