Rambler Uno DAB/DAB+/FM Bluetooth Digital Radio - Roberts - RAMBLERUNOPC

Use the tuning knob to manually scan for stations. The display will show the station name or frequency. You can also save your favorite stations as presets.

Enable Bluetooth on your phone and select 'Rambler Uno' from the list of available devices. You may need to enter a pairing code (usually 0000) if prompted.

The Rambler Uno uses four AA batteries. These are not included with the radio and must be purchased separately.

There is a travel lock switch. Engage this switch to prevent accidental button presses during travel. Disengage the switch to use the radio normally.

Yes, the Rambler Uno has a 3.5mm headphone jack. Simply plug in your headphones for private listening.

The Rambler Uno comes with a 2-year warranty from Roberts.

There is no reset button. If the radio malfunctions, try removing and reinserting the batteries or disconnecting and reconnecting the power cable.

Check the batteries and ensure they are inserted correctly. Replace with fresh batteries if necessary. Check the power cable connection if using mains power.

Try repositioning the radio, especially when using FM. Extend the antenna. Scan again for available stations.

Ensure Bluetooth is enabled on your device. Make sure the Rambler Uno is in pairing mode and not connected to another device. Restart both devices if necessary.

Check the volume level on both the radio and your connected device. Ensure there are no obstructions near the speaker.

Check if the travel lock is enabled. Disable the travel lock switch to ensure buttons are functioning.