Setup, Compatibility & Care
Setup:
This door is designed for standard internal door installation. Ensure the frame is plumb and square before fitting. Follow manufacturer guidelines for hanging, including the correct type and number of hinges. Trimming may be necessary to achieve a perfect fit; always trim from the bottom or side edges, and do not remove more than recommended by the manufacturer (typically a few millimeters) to maintain structural integrity.
Compatibility:
The door is compatible with standard door furniture (handles, hinges, latches) suitable for internal doors. It is part of the XL Joinery White Primed Collection, meaning it can be paired with other doors in the range, including glazed, fire, and bi-fold variants, to maintain a consistent look across different functionalities within a property.
Care:
- Priming: The door is supplied primed and requires a final coat of paint. Use a good quality water-based or solvent-based paint suitable for interior doors. Apply thin, even coats, allowing adequate drying time between applications as per paint manufacturer instructions.
- Cleaning: Clean with a soft, damp cloth. Avoid abrasive cleaners or excessive moisture, which can damage the finish or the door material. For stubborn marks, use a mild detergent solution and wipe dry immediately.
- Maintenance: Periodically check hinges and hardware for tightness. Ensure the door swings freely without binding.