Lubrex Velocity Nano MS 5W-40 Engine Oil - 5L - Engine Flush Plus
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
Lubrex Velocity Nano MS 5W-40 is a high-performance, fully synthetic engine oil designed for modern vehicles requiring strict Mid SAPS specifications to protect sensitive exhaust after-treatment systems. It is ideal for drivers looking to maximize engine longevity through superior sludge prevention and thermal stability, though users must verify their vehicle's specific manufacturer approval requirements before application. This comprehensive kit includes a 5L bottle of oil and a specialized 300ml engine flush additive to ensure your engine remains clean and efficient during every oil change cycle.
All features
| Brand | Lubrex |
|---|
Extended Product Information
FAQs
Can I use this oil in my high-mileage vehicle?
Yes, provided your vehicle meets the listed manufacturer specifications. The engine flush included can help remove sludge that may have built up over time.
Why is this considered a Mid SAPS oil?
It is formulated with low sulphated ash, phosphorus, and sulfur to prevent clogging and damage to modern emission control systems like DPFs.
Is the 300ml engine flush safe for all seals?
Yes, the provided additive is designed to be safe for modern engine gaskets and seals when used according to the provided instructions.
How often should I use the engine flush?
It is recommended to use the flush during every oil change to maintain engine cleanliness and ensure the synthetic oil performs at its peak.
Does this oil meet Volkswagen specifications?
Yes, it is suitable for vehicles requiring VW 505 00 or 505 01 specifications.
Troubleshooting
Oil pressure light remains on after change
Verify oil level with the dipstick and ensure the correct oil filter was installed securely.
Engine noise persists after flush
Check that the old oil was fully drained; if the engine continues to run loudly, consult a professional mechanic as the additive cannot fix mechanical wear.
Pros and Cons
Pros
- Protects sensitive exhaust systems due to Mid SAPS formulation
- Comprehensive kit includes engine flush for thorough maintenance
- Provides excellent fuel economy through reduced friction
- Wide range of manufacturer approvals including BMW, Mercedes-Benz, and Porsche
- Superior resistance to oxidation and thermal breakdown
Cons
- Not suitable for older vehicles without modern exhaust after-treatment systems
- Requires strict adherence to specific manufacturer specifications
- Limited to 5L capacity, which may not suffice for vehicles with larger oil sumps
Setup, Compatibility & Care
To ensure optimal performance, verify that your vehicle manual explicitly lists one of the supported specifications: ACEA C3, MB 229.52, MB 226.5, BMW LL-04, Renault RN0700/0710, Dexos 2, Porsche C40, Ford 917A, or VW 505 00/505 01.
Application Steps:
- Add the 300ml engine flush to your old engine oil while the engine is warm.
- Allow the engine to idle for the recommended time (typically 10-15 minutes) before draining.
- Drain the old oil completely and replace the oil filter.
- Refill with the Lubrex Velocity Nano MS 5W-40 synthetic oil.
- Store remaining oil in a cool, dry place and dispose of used oil at an authorized recycling center.