Shopping.co.uk

Soudal Soudafoam Gap Filler Expanding PU Foam - 500ML

Soudal Soudafoam Gap Filler Expanding PU Foam - 500ML

Soudafoam Gap Filler Gun is a one component, self-expanding, ready to use polyurethane foam, which...

Best current price£4.42from Power Tools Direct

Best offers

Shopping.co.uk recommended and popular offers

Lowest priceMost popular
Power Tools Direct£4.42Visit shop

Soudal Soudafoam® Gap Filler Hand Held Champagne 500Ml 130583

Visit shop

One Offer

1 offer from £4.42

View price history by clicking the chart icon.

Power Tools DirectSoudal Soudafoam® Gap Filler Hand Held Champagne 500Ml 130583
£7.95 delivery
£4.42
Visit shop

Product Information

Full details

This guide is for anyone using the Soudal Soudafoam Gap Filler, a versatile expanding foam designed for filling gaps and providing insulation. It excels at sealing openings and improving thermal and acoustic properties. Be aware that proper application and surface preparation are key for optimal results.

All features

Model Part NumberPTDSOU130583
BrandSoudal

Extended Product Information

FAQs

How much foam will I need?

Calculate the volume of the gap to be filled. The yield of the can is on the label, which will help determine how much is needed.

Can I paint over the foam?

Yes, once the foam is fully cured, it can be painted. Use a paint that is suitable for use on polyurethane foam.

What is the shelf life of the foam?

The shelf life is typically 12-18 months when stored properly. Check the expiration date on the can.

How do I clean up uncured foam?

Use a foam cleaner specifically designed for polyurethane foam. Follow the cleaner's instructions.

Can I reuse a partially used can?

Yes, if the can is stored properly and the nozzle/gun is cleaned to prevent blockage, the can can be reused.

Is the foam waterproof?

While the foam is water-resistant, it is not fully waterproof. For areas exposed to direct water, additional waterproofing measures may be necessary.

What safety precautions should I take?

Wear gloves and eye protection. Work in a well-ventilated area. Avoid contact with skin and eyes. Keep out of reach of children.

Troubleshooting

Foam is not expanding properly.

Ensure the can is shaken well before use. Check the expiration date. Ensure the surface is not too cold.

Foam is dripping or running.

Apply less foam, as it expands. Avoid overfilling the gap. Control the gun trigger carefully.

Foam is not adhering to the surface.

Ensure the surface is clean and dry. Consider slightly moistening the surface before application. Check the compatibility of the surface material.

Pros and Cons

Pros

  • Excellent gap-filling capabilities.
  • Provides both thermal and acoustic insulation.
  • Easy to apply with a gun.
  • Good adhesion to various surfaces.
  • Ozone-friendly propellant.
  • Reduces energy loss through gaps

Cons

  • Not suitable for use on PE, PP, and PTFE surfaces.
  • Requires a foam gun for application.
  • Can be messy if not applied carefully.
  • Cleanup can be challenging if the foam gets on unintended surfaces.
  • May require multiple applications for very large gaps.

Setup, Compatibility & Care

  1. Preparation: Ensure the surface is clean, dry, and free from dust and grease. Protect surrounding areas.
  2. Gun Attachment: Attach the can to a foam gun, following the gun's instructions.
  3. Application: Apply the foam, filling the gap about halfway, as it expands.
  4. Curing: Allow the foam to cure completely, typically 1-2 hours, but check the product label for specific instructions.
  5. Trimming: Once cured, trim any excess foam with a knife.

Compatibility: The foam adheres to most surfaces except PE, PP, and PTFE.

Care:

  • Store the can upright in a cool, dry place.
  • Clean the gun immediately after use with a foam gun cleaner.
  • Protect uncured foam from sunlight and water.

Price History

DatePrice
Visit shop