Inner Tube 145x70-6 - Bent Schrader Valve - 6 Inch

This typically refers to the tire's dimensions: 145mm width, 70mm aspect ratio (height as a percentage of width), and a 6-inch rim diameter.

It is compatible with 6-inch wheels that use tire sizes such as 145x70-6, but the bent valve angle may not suit every specific wheel design or rim configuration.

It has a Schrader valve, which is the same type found on most car tires.

No, this is an inner tube designed for use in tires that require a tube. It is not a direct replacement for tubeless tire setups.

The bent valve is generally designed to provide easier access for inflation. If your current valve stem is straight and difficult to reach, a bent one often helps. However, ensure there is sufficient clearance within the wheel assembly for the bend.

The recommended inflation pressure should be checked on the sidewall of the tire itself or in the equipment's manual, as it varies by application.

Ensure the Schrader valve core is properly seated and not damaged. Check that the air pump connection is secure.

Double-check that the tire is fully seated on the rim and that no part of the inner tube is pinched between the tire bead and the rim. Inspect the tire for punctures or damage.

Use a flexible extension hose for your air pump or inflator, or consider using a valve adapter if needed. Ensure the bent angle is oriented for optimal access.