Apico Motocross Rim Lock - 1.85"
Best current price£10.99from eBay
Best offers
Shopping.co.uk recommended and popular offers
eBay£10.99Visit shop Apico Rim Lock Nylon 1.85"" WM2
Visit shopeBay£10.99Visit shop All Offers
2 offers from £10.99 - £13.99
View price history by clicking the chart icon.
Product Information
Full details
The Apico Motocross Rim Lock - 1.85" is designed for motocross riders seeking to improve tyre security and prevent inner tube damage. Its key benefit is holding the tyre firmly on the rim, even under high torque, thereby preventing slip and protecting the inner tube and valve. A potential caveat is its universal fitment, which, while versatile, requires proper installation to ensure optimal performance.
All features
| Model Part Number | RIML WM2 API |
|---|---|
| Brand | Apico |
Extended Product Information
FAQs
What size rim lock do I need?
The size of the rim lock corresponds to the width of your motorcycle rim. This is a 1.85" model, suitable for rims of that width. Always check your rim's specifications to ensure compatibility.
How often should I check my rim lock?
It's recommended to inspect your rim lock before each ride, and more thoroughly during tyre changes or after significant impacts. Look for wear, cracks, or loosening.
Can this rim lock be used with tubeless tires?
No, this rim lock is designed for use with inner tubes and traditional spoked motorcycle rims.
What is the main benefit of using a rim lock?
The main benefit is preventing the tyre from spinning on the rim, which significantly reduces the risk of pinch flats and damage to the inner tube and valve stem, especially under hard acceleration or braking.
Will this rim lock fit any motorcycle?
The Apico rim lock features universal fitment, meaning it is designed to work with a wide range of motorcycles. However, it's crucial to ensure the 1.85" size matches your specific rim width for optimal performance.
How tight should I make the rim lock nut?
The nut should be tightened securely to prevent movement, but avoid over-tightening, which could strip the threads or damage the rim. A snug fit that holds the lock firmly in place is generally sufficient.
Troubleshooting
Tyre still slips on the rim.
Ensure the rim lock nut is sufficiently tightened. Check for damage to the tyre bead or rim edge that might prevent a secure fit. Verify that the rim lock size is appropriate for the rim.
Inner tube is damaged or punctured.
Inspect the rim lock for sharp edges or debris. Ensure the contoured design is properly seated and not interfering with the tube. Always check the inner tube for tears or holes when fitting.
Rim lock nut won't tighten properly.
Check the threads on both the rim lock stud and the nut for damage or debris. Ensure you are using the correct size nut for the stud.
Difficulty fitting the tyre onto the rim with the rim lock.
Slightly deflate the inner tube to provide more slack. Ensure the rim lock is positioned correctly and not obstructing the tyre bead during installation.
Pros and Cons
Pros
- Enhances tyre stability and prevents bead slip.
- Protects the inner tube from punctures and valve damage.
- Durable and lightweight nylon material.
- Reduces the risk of flats caused by tyre movement.
- Versatile fitment for various motorcycle models.
Cons
- Requires proper installation to ensure effectiveness.
- May not be suitable for all rim and tyre combinations without careful fitting.
- Nylon can be susceptible to damage from extreme impacts compared to metal alternatives.
Setup, Compatibility & Care
Setup:
- Ensure the rim lock is the correct size for your rim and tyre combination (this is a 1.85" model).
- Deflate the inner tube completely.
- Install the inner tube into the tyre and rim.
- Position the rim lock in the appropriate location on the rim, typically opposite the valve stem.
- Feed the valve stem through the designated hole in the rim lock.
- Inflate the inner tube slightly to help seat the tyre bead.
- Tighten the rim lock nut securely against the rim. It should be snug but avoid over-tightening, which could damage the rim or lock.
- Inflate the tyre to your desired pressure.
Compatibility:
- This 1.85" rim lock is designed for motorcycle rims and tyres of corresponding sizes. It is intended for universal fitment on a wide range of motorcycles, but always verify compatibility with your specific rim and tyre dimensions before installation.
Care:
- Inspect the rim lock regularly for any signs of wear, cracks, or damage, especially after impacts or rough terrain use.
- Clean the rim lock and surrounding areas during tyre changes to remove dirt and debris.
- Ensure the nut remains tight to prevent loosening during operation.