XL Joinery Internal Worcester White Primed Door - 1981 x 838 x 35mm

The product description does not specify the core type, but internal doors of this nature often feature a core construction for stability and weight.

You should use a high-quality interior paint. Eggshell, satin, or gloss finishes are common choices. Ensure the paint is compatible with primed wood surfaces.

Yes, a small amount can typically be trimmed from the sides and bottom edges, following standard joinery practices. However, significant trimming may affect structural integrity or design.

No, this product is for the door slab only. Hardware such as hinges, handles, and locks must be purchased separately.

The dimensions are 1981mm in height, 838mm in width, and 35mm in thickness.

Yes, the Worcester range includes other sizes and options such as glazed and fire doors. Please check the product listings for available variants.

Clean the painted surface with a soft, damp cloth. Avoid using abrasive cleaners or solvents, which can damage the paint finish.

Check if the door frame is square and plumb. Ensure hinges are correctly installed and adjusted. Verify that no obstructions are present in the door's path.

Ensure the door surface was properly prepared and primed before painting. Apply thin, even coats of paint, allowing adequate drying time between layers. Avoid painting in humid conditions.

Tighten screws on hinges, handles, and latches. If screws no longer grip, consider using a longer screw or filling the hole with wood filler and re-drilling.