Wieland H-Distributor - 5 Way - 20A - Female - GST18i5 - Surface Mount
The Wieland GST18i5 is a compact distribution block with insertable building installation. The dim...The Wieland GST18i5 is a compact distribution block with insertable building installation. The dimensions are 57.7x40x59mm, with pole marking 3. N. PE. 2. 1. It comes in black and has a combi-distribution block type. The system features three outlets, five poles, and one input. The level of protection offered is IP20, and it can be attached with a separate adapter. This model is identified as "GST18I5 VERDELER 1/3 ZWART". Wieland H-distributor, 5 Way, 20A, Female, GST18i5, Surface Mount, 250 V ac, 400 V ac, Body Orientation: Straight, Series Number: GST18I5V 3P1 B V, MPN: GST18I5V 3P1 B V SW.
The Wieland H-Distributor (model GST18i5V 3P1 B V SW) is designed for electrical installers and system integrators seeking a compact and efficient solution for power distribution in building installations. Its key benefit lies in its ability to simplify wiring with three outlets and five poles within a small footprint. A potential consideration is its IP20 rating, meaning it's suitable for dry indoor environments only.
All features
Model Part Number
GST18I5V 3P1 B V SW
Brand
Wieland
Extended Product Information
FAQs
What is the maximum current rating for this distributor?
The Wieland H-Distributor GST18i5 has a maximum current rating of 20A.
Can this distributor be used outdoors?
No, this distributor has an IP20 rating, which means it is only suitable for dry indoor environments and is not protected against moisture or dust ingress.
How many devices can be connected to this distributor?
This distributor has three outlets, allowing you to connect up to three separate devices or circuits from a single input.
What voltage does this distributor support?
It supports 250V AC for single-phase applications and 400V AC for three-phase applications.
Is a separate adapter needed for mounting?
Yes, a separate adapter is required if you intend to surface mount the distributor.
What do the pole markings '3. N. PE. 2. 1' mean?
These markings indicate the terminal assignments: 1 and 2 are typically for Live phases, 3 is for a third Live phase (in three-phase systems), N is for Neutral, and PE is for Protective Earth.
Troubleshooting
No power to outlets
Verify that the input power source is active and correctly connected. Check that all connections to the outlets are secure and correctly wired according to pole markings.
Intermittent power failure
Inspect all connections for looseness or corrosion. Ensure the total load does not exceed the 20A rating. Check the input cable for damage.
Overheating
Immediately disconnect power. Check for loose connections or overloaded circuits. Ensure the ambient temperature is within operating limits and ventilation is not obstructed.
Pros and Cons
Pros
Streamlines electrical connections with multiple outlets.
Compact size ideal for installations with limited space.
Robust construction for reliable use in appropriate environments.
Clear pole marking (3. N. PE. 2. 1) aids in correct wiring.
Supports efficient power distribution in building installations.
Cons
IP20 rating limits use to dry indoor environments; not suitable for wet or dusty areas.
Requires a separate adapter for surface mounting.
Not designed for high-temperature applications.
Requires careful consideration of load capacity based on the 20A rating.
Setup, Compatibility & Care
Setup:
Ensure the power source is disconnected before beginning installation.
Connect the input cable to the designated input connector on the distributor.
Connect the output cables for your devices or fixtures to the three available outlets. Ensure correct pole assignments (Live, Neutral, Earth) are observed.
If surface mounting, attach the appropriate separate adapter to the distributor and then secure it to the desired surface.
Compatibility:
This distributor is designed for use with the GST18i5 system.
It operates at 250V AC (single phase) and 400V AC (three phase).
Rated for a maximum of 20A.
Care:
Keep the distributor in a dry, clean environment.
Periodically inspect connections for any signs of damage or wear.
Clean with a dry or slightly damp cloth only. Do not use solvents or abrasive cleaners.