Best current price£44.99from B&Q
Shopping.co.uk recommended and popular offers
B&Q£44.99Visit shop B&Q - Hd Quality Border Lightning Led Bathroom Mirror Lights Touch Switch Sensor Demister Pad Mirrors (70X50Cm) (8037)
Visit shop1 offer from £44.99
View price history by clicking the chart icon.
This Biznest HD Quality LED Bathroom Mirror is designed for homeowners seeking a modern, functional, and stylish upgrade to their bathroom. Its key benefit is providing bright, clear illumination and a fog-free experience with a simple touch. A potential caveat is that it requires a mains power connection, necessitating professional installation or existing wiring. This mirror features a premium quality HD silver mirror for superior reflection, an integrated anti-fog demister pad, and a single-touch control for both the LED light and demister.
| Colour | Silver |
|---|---|
| Width | 50 |
| Height | 70 |
| Brand | Biznest |
Yes, due to the mains power connection requirement, professional installation by a qualified electrician is strongly recommended for safety and compliance.
The LED lights are 6000K, which is considered cool white.
The anti-fog demister pad is activated by the same single touch sensor that controls the LED lights. A single touch turns both on or off.
Yes, the mirror features an integrated demister pad to keep it fog-free and has an IP44 water-proof and dust-proof rating, making it suitable for bathroom environments.
This model is 70cm in height and 50cm in width (70x50cm).
No, the LED lights are fixed at 6000K cool white, and the brightness is not adjustable. The touch switch controls the on/off function for both the light and the demister.
The mirror is made with premium quality 5mm HD silver mirror, which provides a clearer and brighter reflection compared to standard aluminum-coated mirrors.
Verify that the mains power connection is secure and switched on. Check the circuit breaker. If the issue persists, consult a qualified electrician.
Ensure the demister pad is activated via the touch sensor. Check that the mirror is receiving mains power. Allow a few minutes for the pad to heat up and clear the condensation.
Ensure the mirror surface around the sensor is clean and dry. Power cycle the mirror by turning off the power at the mains and then turning it back on. If still unresponsive, professional inspection may be needed.
Clean the mirror surface with a soft, damp microfiber cloth, followed by a dry microfiber cloth. Avoid using harsh chemicals. Ensure cleaning cloths are clean before use.
Setup:
This mirror requires a 220V~240V mains power connection. It is strongly recommended that installation be carried out by a qualified electrician to ensure safety and compliance with electrical regulations. Ensure a suitable power supply point is available behind or near the intended mirror location.
Compatibility:
The mirror is designed for standard bathroom electrical systems (220V-240V). It is compatible with most bathroom setups but requires a dedicated power source. The LED lights and demister pad are controlled by a single touch sensor.
Care:
To clean the mirror surface, use a soft, damp cloth. Avoid abrasive cleaners or scouring pads, as they can scratch the mirror. For the LED components and frame, wipe gently with a dry or slightly damp microfiber cloth. Ensure the mirror is completely dry before reactivating the light or demister. Do not spray cleaning liquids directly onto the mirror surface; apply to the cloth first. For the demister pad, ensure it is dry before use.
