Shopping.co.uk

Connect Oetiker Dual Hook Adjustable Ear Clamps - 67.3-93.1mm

Connect Oetiker Dual Hook Adjustable Ear Clamps - 67.3-93.1mm

Adjustable ear clips featuring a dual hook design to provide extra force; help avoid leakage & bre...

Best current price£21.52from eBay

Best offers

Shopping.co.uk recommended and popular offers

All Offers

5 offers from £21.52 - £24.45

View price history by clicking the chart icon.

eBayConnect Oetiker Dual Hook Adjustable Ear Clamps 67.3-93.1mm 10pc 32295
Free delivery in 1–3 days
£21.52
Visit shop

Product Information

Full details

This guide is for automotive technicians and DIY enthusiasts needing a secure and adjustable clamp for CV boots. The Connect Oetiker Dual Hook Adjustable Ear Clamps offer a dual hook design for enhanced force, helping to prevent leakage and breakage. A potential caveat is the need for specific fitting tools for optimal installation.

All features

Model Part Number32295
BrandConnect

Extended Product Information

FAQs

What is the main benefit of the dual hook design?

The dual hook design applies extra force, creating a more secure seal and helping to prevent leakage and breakage of the CV boot material.

What tools are required to install these clamps?

Installation requires specialized tools such as Laser hose clip fitting pliers (Part No. 8261) or CV boot clamp pliers (Part No. 7316).

Can I use these clamps on any size CV boot?

No, these specific clamps are designed for a diameter range of 67.3-93.1mm. Other sizes are available from Connect Oetiker.

What materials are these clamps suitable for?

They are suitable for use with aftermarket thermoplastic (TPE) and rubber CV boots.

What is the maximum recommended closing force?

The recommended maximum closing force is 3800Nm. Exceeding this force can damage the clamp or the boot.

How do I ensure a proper seal?

Proper installation using the correct pliers and applying the recommended closing force is essential for a secure seal. Ensure the clamp is centered on the boot shaft.

Where can I find other sizes of these clamps?

Other sizes are available with different part numbers, such as 32293 (29-30.7mm), 32294 (32.1-37.3mm), and 32296 (94.5-120.2mm).

Troubleshooting

Clamp does not tighten sufficiently

Ensure you are using the correct type of fitting pliers and applying steady, consistent pressure. Verify the clamp is correctly positioned on the boot.

Clamp breaks during installation

You may be exceeding the recommended maximum closing force of 3800Nm. Use a torque-limiting tool or be cautious with the pressure applied. Ensure the clamp is not twisted or misaligned.

Leakage observed after installation

Re-check the clamp's position and ensure it is fully closed and secure. The boot material may be damaged, or the clamp size may not be appropriate for the specific boot shape.

Difficulty fitting the clamp onto the boot

Ensure the boot is correctly seated on the CV joint. The clamp should slide easily into position before tightening.

Pros and Cons

Pros

  • Provides a secure and reliable seal for CV boots.
  • Adjustable nature allows for use on a range of diameters.
  • Dual hook design enhances clamping force and prevents material damage.
  • Compatible with common aftermarket boot materials.
  • Designed for straightforward installation with appropriate tools.

Cons

  • Requires specialized fitting tools (sold separately).
  • Maximum closing force limit must be observed to avoid damage.
  • Specific diameter range may not suit all vehicle applications.
  • Only one size is detailed; other sizes are available but require separate purchase.

Setup, Compatibility & Care

Setup:

  1. Ensure the correct clamp size (67.3-93.1mm diameter) is selected for the CV boot.
  2. Position the clamp over the CV boot on the shaft, ensuring it is centered.
  3. Use Laser hose clip fitting pliers (Part No. 8261) to grip the ear of the clamp.
  4. Apply steady pressure to close the clamp, tightening it until the recommended maximum closing force of 3800Nm is reached. Do not exceed this force.
  5. Alternatively, CV boot clamp pliers (Part No. 7316) can be used for closing.

Compatibility:

  • Suitable for use with aftermarket thermoplastic (TPE) and rubber boots.
  • Designed for specific diameter ranges; ensure your application falls within 67.3-93.1mm.

Care:

  • Keep clamps clean and free from debris before installation.
  • Store in a dry environment to prevent corrosion.
  • Inspect for any damage before use.

Price History

DatePrice
Visit shop