Flat Glazing - 4mm

No, the 4mm Styrene glazing sheet is designed for internal applications only and is not weatherproof.

Clean with a soft, damp cloth and mild soapy water. Avoid abrasive cleaners or solvents.

This product is suitable for *internal* glazing applications, such as decorative panels or cupboard doors, but not for external windows or where significant insulation or weatherproofing is required.

The primary advantages are its lighter weight, increased safety (less prone to shattering), and ease of cutting and handling, all while being more economical.

It is less scratch-resistant than glass. For applications prone to scratching, consider protective films or alternative materials.

While it can be painted with appropriate plastic-compatible paints, testing in an inconspicuous area is recommended first. Its smooth surface may require priming for optimal adhesion.

A sharp utility knife for scoring and snapping, or a fine-toothed saw (hand or power saw) for more precise cuts. Ensure blades are suitable for plastic.

Inspect the protective film. If the film is intact, the scratch may be on the film itself. Peel off the protective film carefully. If the sheet is indeed scratched, contact the supplier for a replacement.

Ensure you are using a sharp blade designed for plastic cutting. For scoring, make multiple passes rather than attempting to cut through in one go. For sawing, use a fine-toothed blade and a slow, steady speed.

Clean the sheet with a mild soap and water solution. Consider using an anti-static spray or cleaner specifically designed for plastics after cleaning to reduce static charge.

Use a drill bit designed for plastic and a slow drill speed. Apply gentle pressure. It's advisable to drill a pilot hole or use a backing material to support the sheet.