Best current price£9.70from eBay
Shopping.co.uk recommended and popular offers
eBay£9.70Visit shop Westco WRAS 1"" F x F Lever Ball Valve Red & Blue Handle Water Plumbing UK
Visit shop
B&Q£10.49Visit shop B&Q - Wras Approved 1" Female X Female Lever Ball ValveRed & Blue Handle Water Isolation Valve
Visit shop2 offers from £9.70 - £10.49
View price history by clicking the chart icon.
This Xcel Home 1" female x female lever ball valve is for plumbers and DIYers needing reliable water supply isolation. Its key benefit is clear hot/cold identification and smooth operation. A minor caveat is its suitability only for threaded female connections. It features a robust brass body, WRAS approval, and easy lever control for quick shut-off.
| Model Part Number | 5056866123501 |
|---|---|
| Brand | Xcel Home |
WRAS (Water Regulations Advisory Scheme) approval means the product has been tested and meets the high standards set for products used in public water supply systems in the UK, ensuring it does not waste, misuse, or contaminate water.
No, this valve is specifically designed and approved for water systems only. Do not use it for gas or other fluid types.
While specific ratings depend on manufacturing tolerances, typical brass ball valves of this type are suitable for standard domestic hot and cold water pressures and temperatures. Consult the manufacturer's detailed specifications for precise limits if operating at extremes.
A 1" female connection means the internal thread diameter is designed to accept a 1" male thread. If you are connecting to a pipe, the pipe's external thread should be 1" male.
The lever handle is typically secured by a nut or screw. While it can be removed for access or replacement, it is not intended for regular removal during normal operation.
The body of this lever ball valve is made from brass, providing durability and corrosion resistance.
Turn off the water supply. Remove the valve, clean the threads, reapply thread sealant, and reinstall. Ensure it is tightened appropriately.
Ensure the valve is fully open or closed. If persistent, check for debris. Minor stiffness can sometimes be resolved by cycling the lever multiple times. Avoid excessive force.
Check for debris inside the valve seat by opening and closing it a few times. If the issue persists, the valve may be damaged or worn and may need replacement.
Setup: Ensure the valve is installed on a clean, threaded pipe or fitting that matches the 1" female thread. Apply appropriate thread sealant (e.g., PTFE tape or pipe dope) to the male threads before screwing the valve on. Hand-tighten and then use a wrench to achieve a snug fit, ensuring the lever is in the desired orientation (typically parallel to the pipe when open, perpendicular when closed). Always ensure the water supply is turned off before attempting installation.
Compatibility: This valve is designed for water systems. It is compatible with standard 1" threaded pipes and fittings. Ensure the application is within the pressure and temperature ratings suitable for a brass ball valve.
Care: Minimal maintenance is required. Periodically check for leaks around the connection. To keep the valve clean, wipe the exterior with a damp cloth. Avoid using abrasive cleaners that could damage the finish. Ensure the lever moves freely; if it becomes stiff, a small amount of suitable lubricant can be applied to the stem, but this is rarely needed.
