Hycote Colour Touch Up Brush Paint - Ford Tango Red - 12.5ml

Your vehicle's paint code is typically located on a sticker or plate in the engine bay, door jamb, or glove compartment. Consult your vehicle's owner's manual for specific location details.

Yes, while designed for touch-ups, it can be used on small areas of rust (after proper treatment), scuffs, or minor imperfections on compatible surfaces.

The paint is fast-drying. Typically, it takes about 15-30 minutes to be dry to the touch, but allow longer (several hours) before applying subsequent coats or exposing to harsh conditions.

This touch-up brush paint is specifically designed for precise application to small defects like scratches and chips. Spray cans are for larger areas.

This product is the colour coat only. For optimal results and durability, especially on bare metal or deep scratches, it is recommended to use a compatible primer before applying this colour coat, and a clear lacquer afterwards.

The number of repairs depends on the size and quantity of the scratches or chips. A 12.5ml bottle is generally sufficient for numerous small touch-ups.

Yes, the product is formulated to be compatible with both modern acrylic finishes and older cellulose finishes.

Ensure the brush is not clogged. Shake the container vigorously again. If the paint has dried in the cap, carefully clean the brush with a suitable solvent before application.

Apply thinner coats and allow adequate drying time between layers. Use a lighter touch and avoid overloading the brush. Practice on a test surface first.

Verify the vehicle's paint code against the product's specifications. Ensure the original paintwork is clean and not excessively faded. Allow the touch-up paint to fully cure, as colour can change slightly as it dries.

Shake the container thoroughly. If paint is too thick, it may be an issue with storage temperature or age; consider replacing. If too thin, apply multiple thin coats rather than one thick one.