AEG Heat Pump Tumble Dryer - A++

Open the dryer door, locate the lint filter, and pull it out. Remove the lint by hand or with a soft brush. Reinstall the clean filter before the next use.

The water container is usually located at the top or bottom of the dryer. Refer to your user manual for the exact location.

The condenser should be cleaned a few times a year. Refer to your user manual for specific instructions on cleaning.

The AbsoluteCare system uses precise drum movements and temperatures to dry clothes gently, preventing shrinkage and damage to delicate fabrics.

It is not recommended to dry shoes in this dryer. The heat and tumbling action can damage the shoes and the dryer.

The Inverter Motor provides quiet and durable operation. It helps in reducing the noise levels and extending the lifespan of the dryer.

The dryer offers various programs, including Bedding, Cotton, Delicate/silk, Eco, Mix, Outdoor/sport, Synthetics, and Wool.

Check if the power cord is properly connected, the door is closed, and the start button has been pressed. Check the fuse.

Clean the lint filter and check for any blockages in the exhaust vent. Ensure that you have selected the appropriate drying program for the fabric type. Make sure the water container is emptied.

Check the lint filter and clean if necessary. Avoid overloading the dryer. Ensure the room temperature is adequate, as excessively cold rooms can extend drying times.

Consult the user manual for specific error codes and troubleshooting steps. Often, these messages relate to filter or water tank issues.