Dunster House Log Cabin 4M X 3M - Brown

The logs are typically interlocking and form the structure of the cabin. Specific thickness details are usually found in the product manual, but the cabin is built with substantial timber for durability.

Yes, the cabin includes 19mm thick floorboards and pressure-treated floor bearers for a sturdy and protected base.

The cabin features pressure-treated floor bearers for rot resistance. The timber itself should be treated periodically with a suitable preservative for long-term protection against weather elements.

Warranty information varies. Please refer to the documentation provided with your purchase or contact Dunster House directly for specific warranty terms.

Yes, you can paint or stain the exterior of the log cabin. Ensure you use products specifically designed for exterior timber to provide adequate protection and finish.

Assembly requires basic DIY skills and can take a significant amount of time, often needing two people. Following the provided instructions carefully is key to a successful build.

Check for debris in the grooves. Ensure you are using the correct logs for the section. Gentle persuasion with a rubber mallet may be needed, but do not force.

Check for any obstructions or warping. Adjust hinges if necessary. Apply a small amount of beeswax or silicone lubricant to the moving parts.

Inspect seals around doors and windows, and check roof joins. Ensure roof boards are properly seated. Reapply sealant if necessary.

Improve ventilation by opening doors/windows when weather permits or consider installing small vents. Ensure the ground around the cabin slopes away to prevent water pooling.