JG Speedfit Equal Tee - White - 22mm
Best current price£6.38from B&Q
Best offers
Shopping.co.uk recommended and popular offers
B&Q£6.38Visit shop B&Q - Pem0222Wp White Push-Fit Equal Pipe Tee (Dia)22mm X 22mm X 22mm
Visit shopB&Q£6.38Visit shop One Offer
1 offer from £6.38
View price history by clicking the chart icon.
B&QB&Q - Pem0222Wp White Push-Fit Equal Pipe Tee (Dia)22mm X 22mm X 22mm
Free delivery in 1–3 days
£6.38
Visit shop
Product Information
Full details
The JG Speedfit Equal Tee (22mm) is designed for plumbing professionals and DIY enthusiasts needing to connect three equal-sized plastic or copper pipes quickly and securely. Its main benefit is a significant reduction in installation time, often up to 40% faster than traditional methods, by eliminating the need for tools, hot works, glue, or flux. A key consideration is the requirement for appropriate pipe inserts when using plastic pipes to ensure a secure seal.
All features
| Model Part Number | Pem0222Wp |
|---|---|
| Brand | JG Speedfit |
Extended Product Information
FAQs
Do I need special tools to install this fitting?
No, the JG Speedfit Equal Tee is a push-fit fitting that requires no special tools for installation or demounting. You can simply push the pipe in and twist the nut to lock it.
What types of pipes can I use with this fitting?
This fitting is compatible with copper pipe and JG Speedfit PEX and polybutylene plastic pipe. For plastic pipes, you must use the relevant manufacturer's pipe inserts.
Can I use this fitting for hot water systems?
Yes, the JG Speedfit Equal Tee is suitable for use with both hot and cold water systems, including central heating.
How do I remove a pipe from the fitting?
To demount, unlock the plastic nut by hand, push the collet (the small locking ring inside the fitting) towards the body of the fitting, and then pull the pipe to release it.
What does 'equal tee' mean?
'Equal tee' means that all three connections on the fitting are the same size, allowing you to join three pipes of the same diameter.
Are pipe inserts included with the fitting?
Typically, pipe inserts are sold separately and must be used with plastic pipes. Please check the product packaging or description for specifics.
What is the advantage over traditional methods like soldering?
The primary advantages are speed of installation (up to 40% faster), safety (no hot works, flames, or toxic fumes), and ease of use, especially in confined spaces, as no special tools or skills are required.
Troubleshooting
Fitting is leaking after installation.
Ensure the pipe was pushed in fully and squarely. Check that the correct pipe insert was used for plastic pipes and was fully inserted. Verify the pipe end is not damaged or deformed. Re-seat the connection.
Difficulty pushing the pipe into the fitting.
Check for any obstructions inside the fitting or on the pipe end. Ensure the pipe is cut square and is not deformed. Slightly twisting the pipe as you push can sometimes help.
Plastic nut is difficult to twist or lock.
Confirm the pipe is fully inserted. Check for debris around the collet or nut. Ensure the pipe is round and not ovalized.
Connection seems loose.
The pipe must be pushed in fully until it stops. The Twist & Lock nut must be tightened until it locks to ensure full compression and sealing.
Pros and Cons
Pros
- Significantly reduces installation time compared to traditional methods.
- Eliminates the need for specialized tools and potentially hazardous hot works.
- Simple push-fit and twist-to-lock mechanism is user-friendly.
- Provides a secure and reliable connection for plumbing systems.
- Resistant to corrosion and scale, ensuring a long service life.
Cons
- Requires specific pipe inserts for all plastic pipe connections.
- May not be suitable for all types of pipe material or very high-pressure applications without specific verification.
- The plastic nut could be subject to damage if overtightened or misused.
- Demounting requires understanding the collet mechanism to avoid damaging the pipe or fitting.
Setup, Compatibility & Care
Setup:
- Ensure pipes are clean, dry, and free from burrs or damage.
- For plastic pipes (PEX, polybutylene), insert the appropriate JG Speedfit pipe insert fully into the pipe end.
- For copper pipe, ensure the end is clean and de-burred.
- Push the pipe firmly and squarely into the fitting until it reaches the internal stop.
- Twist the plastic nut clockwise until it locks firmly in place, securing the connection.
Compatibility:
- Compatible with copper pipe conforming to relevant standards.
- Compatible with JG Speedfit PEX and polybutylene plastic pipe (inserts are mandatory).
- Suitable for hot and cold water and central heating systems.
- Note: Always refer to pipe manufacturer guidelines for specific compatibility.
Care:
- The fittings are maintenance-free under normal operating conditions.
- Avoid exposing the fittings to excessive physical impact or harsh chemicals.
- If cleaning is required, use a slightly damp cloth. Do not use abrasive cleaners or solvents.