Best current price£13.35from eBay
Shopping.co.uk recommended and popular offers
eBay£13.35Visit shop Varilight HV3 Victorian Polished Brass 1 Gang 2 Way Dimmer Switch 60-400W V-Dim
Visit shop
B&Q£14.00Visit shop B&Q - Single V-Dim Rotary 2-Way Dimmer 1 X 60-400WClassic Victorian Brass With Brass KnobHv3
Visit shop13 offers from £13.35 - £24.67
View price history by clicking the chart icon.
The Varilight 1-Gang 2-Way Rotary Dimmer is an ideal lighting control solution for homeowners and office managers seeking to blend classic aesthetic appeal with reliable dimming performance. This unit is designed to provide smooth, flicker-free light management for loads between 60W and 400W, making it perfect for traditional incandescent or high-wattage lighting setups. One important caveat is that users must ensure their total lighting load falls strictly within the 60W to 400W range to avoid performance issues or damage to the dimmer switch.
| Colour | Bronze |
|---|---|
| Model Part Number | HV3 |
| Brand | Varilight |
This dimmer is rated for 60W-400W. Standard LEDs often draw very little power, so unless your total wattage exceeds 60W, it may not function correctly with this specific model.
This is a 2-way dimmer, meaning it can be used to control a light from two different locations.
The product features an elegant Bronze finish designed for durability and a traditional aesthetic.
Operating below the 60W minimum load can cause flickering, reduced dimming range, or instability in the light output.
This rotary dimmer is a standard 2-wire design and typically does not require a neutral wire, but consult the included wiring diagram for your specific circuit configuration.
Verify that the total load on the dimmer is at least 60W. If it is lower, the dimmer may be unstable.
Check that the bulbs used are dimmable and that the total load does not exceed 400W. If buzzing persists, replace the bulbs with high-quality dimmable alternatives.
Ensure all wiring connections are secure at the back of the switch and verify that the circuit breaker is in the 'on' position.
This dimmer should be installed by a qualified electrician to ensure compliance with local electrical safety regulations. Before installation, confirm that the wiring in your wall box is compatible with a 2-way switching configuration. For care, keep the bronze faceplate clean by wiping it gently with a soft, dry microfiber cloth. Avoid using harsh chemical cleaners, abrasive sprays, or water directly on the switch, as these can degrade the finish and damage the internal electrical components.
