Gas Strut Stay Support Cabinet Door Hinge - GTV (50Nm)

The 50Nm (Newton-meters) rating indicates the amount of torque or force the strut provides to lift and support the door. A higher Nm value means more force.

Yes, this strut is commonly used for single lift-up cabinet doors. For wider doors, you might need two struts for balanced support.

The 50Nm is suitable for moderate weight doors. If the door feels difficult to lift manually or the strut struggles to hold it open, it might be too heavy. Ideally, test with one strut and add another if needed.

The type of screws depends on your cabinet material (wood, MDF, etc.). Generally, wood screws of an appropriate length and gauge are recommended. Ensure they are long enough to securely grip the cabinet frame.

No, this gas strut stay is specifically designed for lift-up doors and flaps that open upwards.

For standard cabinet widths (e.g., 40-60 cm), one strut is often sufficient. For wider or heavier doors, two struts are recommended for balanced support and smoother operation.

The 50Nm is a fixed force rating for this specific model. Adjustment is typically done through the mounting points rather than altering the strut's internal pressure.

Ensure the door is not too heavy for the 50Nm rating, or consider adding another strut. Verify all mounting points are secure.

The 50Nm force might be too high for the door's weight, or the strut may be faulty. Check for smooth movement and consider a lower Nm rated strut if available and applicable.

Ensure the mounting brackets are correctly aligned and fully seated. If resistance is high, check for obstructions.

While designed for silent operation, minor noises can occur. If the noise is significant or persistent, check for loose fittings or potential internal issues and contact support.