Kenable USB 2.0 Active Repeater Extension Cable - 10m

This cable is designed for USB 2.0 specifications and will function with USB 3.0 devices, but only at USB 2.0 speeds (up to 480Mbps).

No, this is a plug-and-play device. Your operating system (Windows 98SE up to Windows 7) should automatically recognize it.

The cable supports USB 2.0 high-speed data transfer rates of up to 480Mbps, provided it is connected to a USB 2.0 port on the host computer.

While technically possible to connect multiple cables, it is generally not recommended as each connection and extension can introduce signal degradation and potential instability. It is best to use a single 10m repeater cable where needed.

The cable is compatible with Windows 98SE, Windows ME, Windows 2000, Windows XP, Windows Vista, and Windows 7.

No, the Kenable USB 2.0 Active Repeater Extension Cable is powered directly from the USB port it is connected to and does not require an external power adapter.

Ensure the cable is securely plugged into both the computer and the USB device. Try connecting directly to the computer without the extension cable to confirm the device is functioning. If using an older system, verify it meets the minimum OS requirements. Ensure you are using a USB 2.0 port for optimal performance.

Confirm that the host computer's port is USB 2.0. If connected to a USB 1.1 port, speeds will be limited to 12Mbps. Check for other high-bandwidth USB devices that might be sharing the bus.

Verify that the cable is not being subjected to significant electromagnetic interference. Ensure all connections are firm. If possible, test the cable with a different USB device to rule out device-specific issues.

Ensure the cable is functioning as an active repeater. If the issue persists beyond 5 meters, the repeater function may not be active or the cable may be faulty. Check system requirements and ensure a compatible OS is in use.