Best current price£2.44from Power Tools Direct
Shopping.co.uk recommended and popular offers
Power Tools Direct£2.44Visit shop Timco Sds14210 Sds Plus Hammer Bit 14.0 X 210 Clip 1
Visit shop
B&Q£6.23Visit shop B&Q - TimcoSds Plus Hammer Bit (Size 14.0 X 2101 Each)
Visit shop4 offers from £2.44 - £8.50
View price history by clicking the chart icon.
This TIMCO SDS Plus Hammer Bit (14.0 X 210) is designed for professional tradespeople and DIY enthusiasts seeking a durable and effective solution for drilling into masonry and concrete with SDS Plus rotary hammers. Its key benefit is reliable performance due to its heat-treated construction, minimizing bending and ensuring longevity. A potential consideration is its specialized SDS Plus shank, requiring compatible hammer drill chucks. This bit features a Tungsten Carbide tip for enhanced drilling power and a shot blast finish for rust protection, making it suitable for frequent use.
| Model Part Number | 14.0 X 210 |
|---|---|
| Brand | Timco |
The tip is made of Tungsten Carbide, known for its hardness and durability.
No, this bit has an SDS Plus shank and requires a rotary hammer with an SDS Plus chuck. It cannot be used with standard drill chucks.
Clean off dust and debris after use and store in a dry place. The shot blast finish provides rust protection.
The working length is 150mm, while the total length is 210mm.
The full heat treatment eliminates the risk of bending, making the bit more robust and long-lasting under stress.
This bit is specifically designed for drilling into hard materials like concrete and masonry using hammer action. It is not recommended for wood or metal.
Ensure the chuck is in the correct open position for bit insertion. Check the SDS Plus shank for debris or damage. Make sure your rotary hammer is designed for SDS Plus bits.
Check for blockages in the flutes. Ensure you are using the correct drilling mode (hammer drill mode for masonry). Apply consistent pressure without forcing the bit. The Tungsten Carbide tip may be worn and require replacement.
Cease use immediately. The heat-treated design should prevent bending under normal use. If bent, it may have been subjected to extreme lateral force or a manufacturing defect. Replace the bit.
Setup: To use this drill bit, insert the SDS Plus shank directly into the SDS Plus chuck of your compatible rotary hammer. Ensure it clicks securely into place. Always wear appropriate safety gear, including eye protection and gloves.
Compatibility: This bit is exclusively compatible with rotary hammers featuring an SDS Plus tool holder system. It will not fit standard three-jaw chucks or other SDS systems (e.g., SDS Max).
Care: After use, remove any dust and debris from the bit. Store the bit in a dry environment to prevent rust, although the shot blast finish offers protection. Periodically inspect the Tungsten Carbide tip for any signs of excessive wear or damage. Clean the SDS Plus shank to ensure optimal engagement with your tool.
