Best current price£16.51from eBay
Shopping.co.uk recommended and popular offers
eBay£16.51Visit shop Sealey CVJ Boot/Hose Clip Pliers Ear Type Hose Clamp Removal Tools Boot DIY
Visit shopeBay£17.06Visit shop Sealey CVJ Boot/Hose Clip Pliers Ear Type - VS1633
Visit shop
B&Q£18.59Visit shop B&Q - Vs1633 Cvj Boot/hose Clip Pliers Ear Type
Visit shop6 offers from £16.51 - £24.98
View price history by clicking the chart icon.
The Sealey VS1633 CVJ Boot/Hose Clip Pliers are designed for automotive professionals and serious DIY enthusiasts who frequently work on cooling, fuel, and vacuum systems. These pliers provide the mechanical advantage necessary to secure ear-type hose clips and CVJ boot clips with precision, though they are specifically engineered for these clamp styles rather than general-purpose hose clamps.
| Model Part Number | VS1633 |
|---|---|
| Brand | Sealey |
No, these are designed specifically for ear-type clips. They will not effectively tighten or loosen worm-drive or screw-type clamps.
The Sealey VS1633 has a total length of 235mm.
The handles are insulated with vinyl for comfort and general protection, but they are not VDE rated for high-voltage automotive work. Always disconnect the battery before working on electrical systems.
These pliers are generally intended for passenger and light commercial vehicle clips. Verify the clip size matches the tool's jaw capacity before use.
After use, wipe the tool down with an oily rag to leave a thin protective film of oil on the metal surfaces.
Apply a small amount of penetrating oil or multi-purpose lubricant to the center pivot joint and work the handles back and forth.
Ensure the jaw opening is centered directly over the clip ear. If the clip is too large or too small for the specific jaw gap, verify that you are using the correct type of clip for the tool.
This tool requires no formal setup; it is ready to use immediately upon removal from the packaging. It is compatible with standard ear-type hose clips found on most light commercial and passenger vehicles. To maintain the tool, keep the pivot point lubricated with a light machine oil to ensure smooth opening and closing. Wipe the jaws clean of dirt, grease, and debris after each use to prevent oxidation and ensure a solid grip on the next clip. Store in a dry environment to prolong the life of the vinyl handle insulation.
