Best current price£175.00from B&Q
Shopping.co.uk recommended and popular offers
B&Q£175.00Visit shop B&Q - Triton Spinsf05Sw Instaflow 5.4Kw Single Point Instantaneous Water Heater (Size: 244H X 136W X 80D mm)
Visit shop1 offer from £175.00
View price history by clicking the chart icon.
The Triton Instaflow 5.4kW is designed for users needing an instant, on-demand hot water solution for a single outlet, particularly in utility rooms or commercial spaces lacking a pre-existing hot water supply. Its key benefit is providing hot water only when needed, saving energy. A potential caveat is its suitability for single-point use, not for whole-house or multi-point systems. This compact unit heats water as it flows through, eliminating standby energy consumption.
| Model Part Number | SPINSF05SW |
|---|---|
| Brand | Hanicks |
No, the Triton Instaflow 5.4kW is designed as a single-point instantaneous water heater and can only supply one tap effectively.
The Triton Instaflow 5.4kW comes with a 1-year manufacturer warranty.
Wipe the exterior casing with a soft, damp cloth. Avoid using harsh chemicals or abrasive cleaning materials.
This is a 5.4kW unit and requires a dedicated electrical circuit with sufficient capacity. Professional installation by a qualified electrician is mandatory.
The unit has an IP25 rating. This means it is protected against solid objects larger than 2.5mm (like wires) and against water jets projected from any direction.
Temperature is primarily controlled by the flow rate through the unit. A lower flow rate generally results in hotter water, while a higher flow rate results in cooler water. Ensure the selected setting on the unit is appropriate for your needs.
This unit is typically not powerful enough to provide a satisfactory shower experience, as showers require a higher flow rate and sustained heating capacity. It is best suited for handwashing or utility sinks.
Check that the power supply is on and the circuit breaker is engaged. Ensure the water flow rate is sufficient to activate the unit. Verify that the water inlet filter is not blocked.
Incoming water temperature may be too low, or the flow rate might be too high for the unit's heating capacity. Reduce the flow rate at the tap or consider if the ambient temperature is exceptionally low. Ensure the unit's chosen setting is appropriate.
This could indicate limescale buildup. Descaling may be required, or contact a qualified installer for advice. Ensure the water flow is smooth and not turbulent.
Confirm the unit is correctly wired and receiving power. Check the main power supply and the dedicated circuit breaker. Ensure the flow switch is engaging correctly.
Setup:
Compatibility:
Care:
