Maston Car-Rep Auto Spray Paint - Ultramarine Blue - 400ml

The surface must be clean, dry, and free from contaminants like grease, oil, rust, and dust. Light sanding and cleaning with a degreaser are recommended for optimal adhesion.

The paint is fast-drying. Typically, it is touch-dry within 10-15 minutes, allowing for recoating after approximately 30-60 minutes, depending on environmental conditions.

Yes, it is suitable for use on primed plastic parts. It is always advisable to test on a small, inconspicuous area first to ensure compatibility.

The paint has a shelf life of 60 months (5 years) when stored correctly in a cool, dry place.

After use, invert the can and spray for a few seconds to clear the nozzle. If it becomes permanently blocked, you can try removing the nozzle and soaking it in a solvent like acetone or lacquer thinner, then drying it thoroughly before reattaching.

It offers heat resistance up to 100°C, making it suitable for components that experience moderate heat, such as parts within the engine bay or exhaust trims, but not for direct exhaust contact.

It means that the paint inside the can will not harden or become unusable over time, even after the can has been opened and used. You can use the entire contents of the can at your own pace without concern for the paint drying out within the can.

Shake the can more vigorously for an additional minute. Ensure the nozzle is not clogged; if it is, clear it by inverting the can and spraying briefly, or replace the nozzle if possible.

Apply paint in thinner, multiple coats rather than one thick coat. Ensure adequate distance from the surface and maintain a consistent spraying motion.

You may be holding the can too close to the surface or applying the paint too heavily. Apply in lighter coats and allow sufficient drying time between applications.

Immediately after spraying, turn the can upside down and spray for a few seconds to clear any residual paint from the nozzle. If clogged, try soaking the nozzle in a suitable solvent.