Best current price£12.89from OnBuy.com
Shopping.co.uk recommended and popular offers
OnBuy.com£12.89Visit shop Mirka Mirlon Abrasive Finishing Pads Scotch Ultra/Very Fine Grey/Red X 10 3513640931599
Visit shop1 offer from £12.89
View price history by clicking the chart icon.
The Mirka Mirlon Abrasive Finishing Pads are designed for professionals and hobbyists who require a versatile, flexible solution for surface preparation and finishing on complex geometries. These pads offer an excellent way to scuff-sand, clean, and refine surfaces without damaging the underlying material, though users should note that they are manual pads and not intended for heavy material removal compared to power sanding.
| Model Part Number | 8019002037 |
|---|---|
| Brand | MIRKA |
Yes, Mirka Mirlon pads can be used for both dry and wet sanding applications.
Absolutely, they are excellent for de-nibbing between coats of lacquer or varnish.
The Red pads are Very Fine for general scuffing, while the Grey P1500 pads are Ultra Fine for final finishing and polishing preparation.
Yes, you can easily cut the 150mm x 230mm sheets with standard scissors to fit your specific needs.
They are designed to be used by hand, though you can wrap them around a sanding block if you require a flatter surface profile.
Gently tap the pad against a hard surface or use compressed air to dislodge trapped particles.
Ensure you are using consistent pressure and verify you have selected the correct grit for the material surface.
Avoid sharp metal edges or high-heat friction; use the pad with a lighter touch if it begins to fray.
To use the pads, simply fold or cut to the desired size using standard shop scissors. For best results, use light, even pressure and consistent overlapping strokes to maintain an uniform finish across the entire surface. After use, these pads can be cleaned by blowing them out with compressed air or rinsing them with water to remove debris. Store in a dry environment away from direct sunlight or extreme temperature fluctuations to maintain the structural integrity of the abrasive fibers.
