Best current price£22.73from B&Q
Shopping.co.uk recommended and popular offers
B&Q£22.73Visit shop B&Q - 7/16" X 20 Unf Thread Repair Cutter Kit Helicoil Set For Damaged Threads 14Pc
Visit shop2 offers from £22.73
View price history by clicking the chart icon.
This 14-piece AB Tools thread repair kit is designed for professionals and DIYers needing to restore stripped, damaged, or corroded internal threads, particularly in soft materials, providing a permanent, stronger repair using durable stainless steel inserts. While offering a robust solution for thread damage, users should follow the step-by-step process carefully for optimal results.
| Model Part Number | 7/16" X 20 |
|---|---|
| Brand | AB Tools |
This specifies the thread size. 7/16" refers to the nominal diameter of the thread, and 20 refers to the number of threads per inch (TPI). UNF indicates 'Unified National Fine,' a standard thread series.
While designed to create stronger threads in softer materials, the process and stainless steel inserts can be used on steel components, provided the correct thread size is needed and the application permits.
A drill, a hammer, and cutting oil are recommended for optimal results, though not always strictly required depending on the material and user experience. A measuring tool to verify thread pitch might also be useful.
The kit includes 10 x 7/16 x 20 UNF Helicoil inserts.
The tang breaking tool is used to snap off the small lug (tang) at the bottom of the installed Helicoil insert, ensuring it does not interfere with the bolt being threaded in.
Yes, this kit is very useful for repairing stripped threads in automotive components like engine blocks, transmissions, or body panels where specific thread sizes are common.
When installed correctly, the stainless steel Helicoil insert provides a permanent and durable repair that is typically stronger and more resistant to wear than the original tapped thread.
Ensure the correct thread tap was used and that cutting oil was applied. Check for any debris in the tapped hole.
Ensure the tang is properly aligned with the tool. Tap the tool lightly with a hammer if necessary to break the tang cleanly.
Ensure the drill bit is sharp and properly centered. Use appropriate drilling speed for the material being worked on.
Re-check the tapping process to ensure threads were cut correctly. Ensure the Helicoil insert was installed to the correct depth.
Setup: The kit is designed for a sequential repair process:
Compatibility: This kit is specifically for repairing 7/16 x 20 UNF internal threads. Ensure this is the correct thread size and pitch for your application before use.
Care: Store all components in the provided blow-molded case to prevent loss or damage. Clean tools after use, especially the drill bit and tap, to maintain their cutting efficiency. Avoid exposing the stainless steel inserts to harsh chemicals that could compromise their integrity.
