Best current price£25.41from B&Q
Shopping.co.uk recommended and popular offers
B&Q£25.41Visit shop B&Q - PegdevPdlDetectable Underground Tape (Street Lighting) 150mm Yellow Traceable 130 Micron En 12613 Tape (35M)
Visit shop2 offers from £25.41
View price history by clicking the chart icon.
This Pegdev Detectable Underground Tape (Street Lighting) is designed for utility professionals and construction workers who need to clearly mark and identify buried street lighting cables. Its key benefit is preventing accidental damage during excavation through high visibility and detectability, with a primary caveat being its specialized use for utility marking rather than general-purpose barrier tape. The tape features a bright yellow color and integrated stainless steel tracer wires for easy location with standard equipment, ensuring compliance with EN 12613 standards for reliable safety.
| Model Part Number | Pdl |
|---|---|
| Brand | Pegdev |
The primary purpose is to visually warn and allow for the detection of buried street lighting cables to prevent damage during excavation.
It contains two stainless steel tracer wires that can be detected from the surface using standard locating equipment.
The tape is made from durable 130-micron Polypropylene.
It complies with EN 12613 standards.
While designed for street lighting, its detection and visibility features make it potentially suitable for other buried utilities, but its specific designation is for street lighting.
It is typically installed several inches above the buried service, before backfilling the trench. Specific recommendations may vary based on local regulations or project requirements.
The tape is 150mm wide and comes in a 35-meter length.
Ensure the locator is functioning correctly and is set to detect tracer wires or metallic signals. Verify the tape was installed with the tracer wires facing upwards if specified by the locator manual. Confirm the tape is within the effective range of the locator.
Inspect the tape for any signs of physical damage during installation or excavation. While durable, extreme mechanical stress can compromise integrity. Replace any damaged sections if discovered before backfilling.
Check the depth of the tape; signals weaken with depth. Ensure the tape is laid flat and not twisted. Obstructions in the soil could also interfere. Try sweeping the locator in multiple directions.
Setup: This tape is designed to be laid directly in the trench above the buried service, typically several inches (e.g., 6-12 inches) above the cable or pipe it is protecting. It should be placed before backfilling the trench. Ensure the tape is laid flat and straight for optimal visibility and detectability.
Compatibility: The stainless steel tracer wires are compatible with most standard underground utility locating devices designed to detect metallic or tracer wire signals. It is intended for use with buried electrical cables, specifically street lighting systems.
Care: As an underground product, it requires no regular maintenance. Its durable polypropylene construction is resistant to moisture and soil chemicals. The primary care is ensuring correct installation to maintain its protective function over time.
