Xtremeauto Heat Resistant Paint - Deep Brunswick Green
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This guide is for anyone using Xtremeauto Heat Resistant Paint to protect and enhance metal surfaces on vehicles and equipment. The paint offers excellent heat resistance up to 180 degrees Celsius, providing a durable, fast-drying, gloss finish. However, it's not suitable for application on aluminum surfaces. This guide will help you understand the paint's features, application, and care.
All features
| Model Part Number | High_Temperature_temp_Drum_Stove_exhaust_Bare_63 |
|---|---|
| Brand | XtremeAuto |
Extended Product Information
FAQs
What surfaces can I use this paint on?
You can use this paint on most bike, car, and motorbike parts, including brake calipers, engine heads, engine parts, rocker covers, manifolds, exhausts, and more. Avoid using it on aluminum.
Do I need a primer?
No, this paint is designed to be applied directly to most metal surfaces without the need for a primer.
What is the maximum temperature this paint can withstand?
This paint can withstand temperatures up to 180 degrees Celsius.
How should I clean my equipment after use?
Clean brushes and spray guns immediately after use with cellulose thinners.
Can I use this paint on my exhaust system?
Yes, this paint is suitable for use on exhaust systems. Ensure the surface is clean and free of rust before applying.
How long does it take for the paint to dry?
The paint is fast-drying, but allow at least 10 minutes between coats when spraying.
Can I thin the paint?
Yes, you can thin the paint with up to 5-10% cellulose thinners if needed.
Troubleshooting
Paint is not adhering properly.
Ensure the surface is thoroughly cleaned and degreased before application. Lightly sand the surface to improve adhesion.
Paint finish is not glossy.
Ensure paint is properly mixed and applied in thin, even coats. Avoid applying too much paint in one coat.
Paint is running or sagging.
Apply thinner coats and allow sufficient drying time between coats. Hold the spray gun at the correct distance and move it evenly.
Pros and Cons
Pros
- High temperature resistance
- Fast drying properties
- Direct application to many surfaces
- Resistant to various chemicals and fluids
- Offers a durable, gloss finish
Cons
- Not suitable for aluminum surfaces.
- Requires proper surface preparation for best results.
- Thinning is only recommended with cellulose thinners.
Setup, Compatibility & Care
- Surface Preparation: Ensure the surface is clean, dry, and free from dirt, oil, or grease. Remove any rust or loose paint.
- Application: Stir the paint well before use. Apply by brush or spray gun.
- Thinning (Optional): If desired, thin with up to 5-10% cellulose thinners.
- Coats: When spraying, allow 10 minutes between coats.
- Compatibility: This paint is compatible with steel, alloy, and bare metal surfaces (excluding aluminum).
- Care: Clean tools immediately after use with appropriate solvents.