Einhell SDS Hammer Drill Kit - 18V 36V X-Change
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This Einhell cordless rotary hammer kit is designed for DIY enthusiasts and professionals needing a versatile and powerful tool for drilling, impact drilling, and chiseling. Its key benefit is the combination of pneumatic impact mechanism power with cordless freedom through Twin-Pack technology, offering high drilling performance without the hassle of cords. A caveat is the need for online registration to avail the 10-year motor warranty, and the tool requires compatible Power X-Change batteries.
All features
| Model Part Number | 4513950 + x2 4511516 + x2 4514095 + BP-10015 + WC-SDS5 + WC-SDSCH |
|---|---|
| Brand | Einhell |
Extended Product Information
FAQs
What is Twin-Pack Technology?
Twin-Pack technology allows the tool to run on two 18V Power X-Change batteries simultaneously, combining their power to deliver a higher voltage (36V) for enhanced performance and longer runtime, similar to a corded tool.
How do I get the 10-year motor warranty?
The 10-year motor warranty for the PurePOWER brushless motor is activated by registering your tool online with Einhell within a specified period after purchase.
Can I use a single 18V battery with this tool?
No, this rotary hammer is designed specifically for Twin-Pack technology and requires two 18V Power X-Change batteries to operate.
What types of bits can I use with this hammer drill?
The tool is equipped with an SDS-plus tool chuck, so you must use SDS-plus drill bits and chisels.
How do I switch between drilling and chiseling modes?
There is a mode selector on the tool that allows you to switch between drilling, impact drilling, chiseling, and chisel lock functions. Refer to the tool's manual for the exact location and operation of the selector.
Is this tool suitable for heavy-duty demolition?
While capable of chiseling, it is primarily designed for rotary hammering and drilling. For extensive, heavy-duty demolition, a dedicated demolition hammer might be more appropriate, but this tool can handle medium-duty demolition tasks effectively.
How often should I clean the tool?
It is recommended to clean the exterior of the tool with a dry cloth after each use. Ensure ventilation slots are clear of dust and debris to maintain optimal performance and prevent overheating.
Troubleshooting
Tool does not power on
Ensure both Power X-Change batteries are fully charged and correctly inserted. Check if the overload safety stop has been triggered; if so, allow the tool to cool down and reset.
Low power or performance
Verify that both batteries are sufficiently charged. Clean any dust or debris from the motor vents and the tool chuck. Ensure the correct drill bit or chisel is being used for the material.
Drill bit not locking securely
Check the SDS-plus bit for damage or debris. Ensure the bit is fully inserted into the chuck and that the semi-automatic locking mechanism has engaged correctly. Clean the chuck if necessary.
Impact function not working
Confirm the tool is set to 'Impact Drilling' or 'Chiseling' mode. Ensure the chisel lock is disengaged if attempting to drill or impact drill. Check that the correct bit type for impact is installed.
Pros and Cons
Pros
- High drilling capacity and power due to Twin-Pack 36V system.
- Cordless freedom enhances portability and maneuverability.
- Brushless motor technology offers superior performance and longevity.
- Versatile with four distinct operating modes.
- Ergonomic design improves user comfort and control.
Cons
- Requires two 18V Power X-Change batteries, which need to be purchased separately or are included in specific kits.
- 10-year motor warranty requires online registration.
- Can be heavier than corded alternatives due to battery configuration.
- Chiseling function may require specific SDS chisels not always included in basic kits.
Setup, Compatibility & Care
Setup:
- Ensure you have at least two Einhell 18V Power X-Change batteries and a compatible charger.
- Insert the batteries into the battery compartments until they click into place.
- Select the desired function (Drilling, Impact Drilling, Chiseling, Chisel Lock) using the mode selector.
- Insert the appropriate SDS-plus drill bit or chisel into the tool chuck and push it fully in until it locks semi-automatically.
- Adjust the drilling depth stop if necessary.
Compatibility:
- This tool is part of the Einhell Power X-Change family, meaning it is compatible with all Einhell Power X-Change batteries and chargers.
- Uses standard SDS-plus bits and chisels.
Care:
- Keep the tool clean by wiping it with a dry cloth after each use. Remove dust from vents.
- Store the tool and batteries in a dry, protected environment.
- Periodically check the tool chuck for debris and clean it.
- Ensure batteries are stored with a partial charge and away from extreme temperatures.
- Register your motor online promptly to activate the 10-year warranty.