VEVOR Steel Wire Rope - 3/16 Inch - 250 Feet - Silver
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
The VEVOR 3/16 inch stainless steel wire rope is designed for DIY enthusiasts, contractors, and homeowners who require a durable, high-strength solution for structural projects like railing systems, garden trellises, or outdoor lighting displays. Its core benefit lies in its robust 7x19 construction, which provides a high 3700 lb breaking strength while maintaining enough flexibility for tight turns; however, users should note that the cable is relatively stiff compared to thinner gauges, requiring proper cutting tools for clean edges.
All features
| Colour | Silver |
|---|---|
| Model Part Number | 010284938351 |
| Brand | VEVOR |
Extended Product Information
FAQs
Can this cable be used with aluminum ferrules?
Yes, but ensure the ferrules are specifically sized for 3/16-inch diameter wire rope for a secure crimp.
Is this cable safe for lifting heavy loads?
No. This wire rope is intended for structural support, fencing, and landscaping, not for lifting heavy objects or overhead hoists.
Does the wire rope rust?
It is made of corrosion-resistant stainless steel, which performs well outdoors, though it may show surface staining in extreme high-salt environments.
What tools are needed to install this?
You will need a cable cutter, a wire rope crimper (swaging tool), and appropriate end fittings like turnbuckles or eye bolts.
Can I bend this around tight corners?
The 7x19 construction is flexible, but it is not a 'braided' wire. Avoid bending it at sharp 90-degree angles to prevent structural weakening; use corner pulleys or thimbles if necessary.
Troubleshooting
Cable ends are fraying after cutting
Use a specialized cable cutter rather than bolt cutters or a hacksaw to ensure a clean, bundled cut.
Difficulty inserting cable into terminal fittings
Ensure the cable end is cut cleanly and remove any loose metal whiskers with a metal file.
Visible tension loss in long spans
Check your end-point anchors to ensure they haven't shifted and adjust the turnbuckle to restore tension.
Pros and Cons
Pros
- High tensile strength of 3700 lbs
- Excellent resistance to environmental corrosion
- Easy to cut to exact custom lengths
- Smooth finish prevents snagging and injury
- Versatile for both indoor and outdoor structural support
Cons
- Can be stiff to handle during initial installation
- Requires professional-grade cutters for a clean flush end
- Not intended for overhead lifting or critical hoist applications
Setup, Compatibility & Care
To ensure maximum safety, always use hardware (such as thimbles and sleeves) that is specifically rated for 3/16-inch wire rope. When cutting the cable, use a dedicated high-leverage cable cutter to ensure a clean cross-section; using a standard hacksaw can cause the strands to fray, which makes feeding the cable through terminals difficult. To prevent fraying before installation, you can apply a piece of masking tape around the cutting point. Periodically check tension points, especially after extreme temperature fluctuations, and tighten turnbuckles if you notice slack. If the environment is salt-heavy (near the ocean), rinse the cable with fresh water occasionally to maintain its long-term integrity.