AK Interactive Primer Spray - Grey
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
The AK Interactive 1010 Grey Fine Primer Spray is designed for model enthusiasts seeking an easy and effective way to prime plastic or metal models before painting. Its key benefit is providing excellent coverage and a smooth surface for subsequent paint layers, ensuring a superior finish. A potential caveat is the need for thorough shaking to ensure proper mixing of the synthetic lacquer. This product offers a quick-curing, durable base coat that is resistant to acrylics, enamels, and weathering effects.
All features
| Colour | Grey |
|---|---|
| Model Part Number | 1010 |
| Brand | AK Interactive |
Extended Product Information
FAQs
How long does the primer take to dry?
The synthetic lacquer cures quickly, generally allowing you to paint over it within 15-30 minutes, depending on environmental conditions like temperature and humidity.
Can I use this primer on metal parts?
Yes, this primer is designed to work effectively on both plastic and metal surfaces commonly found in model kits.
What is the best way to clean a clogged nozzle?
Turn the can upside down and spray for a few seconds. If still clogged, carefully remove the nozzle and soak it in a solvent like cellulose thinner. Rinse and dry thoroughly before reattaching.
Does the grey color affect the final paint job?
Grey is an excellent neutral base coat. It provides good contrast for both dark and light colors, helping you achieve true tones with your subsequent paints. It's a versatile color for most modeling projects.
What is the volume of paint in the can?
Each can contains 400 ml of primer.
Is this primer safe to use indoors?
While it can be used indoors, it is strongly recommended to do so only in a very well-ventilated area, such as near an open window or with an active exhaust fan, due to the nature of spray paints.
Troubleshooting
Primer sprays unevenly or sputters.
Ensure the can is shaken vigorously for at least one minute before and during use. Check if the nozzle is clogged; if so, clean it as per the care instructions.
Primer is not adhering to the surface.
Make sure the surface is clean, dry, and free from grease or dust. For some very slick plastics, a different type of primer might be needed, but this primer is generally very effective.
Runs or drips are visible on the surface.
You may be holding the can too close to the surface or applying too much at once. Try holding the can further away and applying in lighter, more frequent passes. Allow coats to dry slightly before applying additional layers if needed.
Primer appears too thin or transparent.
This can happen if the can was not shaken sufficiently or if applied from too far away. Reshake the can thoroughly and apply from a slightly closer distance in overlapping passes.
Pros and Cons
Pros
- Simple to apply for hobbyists of all skill levels.
- Offers superior adhesion for long-lasting paint jobs.
- Resistant to common paint types and weathering.
- Quick drying time speeds up the modeling process.
- Suitable for a wide range of model materials.
Cons
- Requires vigorous shaking before use to prevent inconsistencies.
- As with all spray paints, good ventilation is essential during application.
- Fine details might require careful nozzle control to avoid overspray.
Setup, Compatibility & Care Instructions
Setup:
- Shake Thoroughly: Before the first use, and intermittently during use, shake the can vigorously for at least one minute to ensure the pigments and propellant are properly mixed.
- Ventilation: Always use the primer in a well-ventilated area. Outdoors or near an open window is recommended.
- Distance: Hold the can approximately 20-30 cm (8-12 inches) away from the surface you intend to prime.
- Application: Apply in short, even strokes, moving the can back and forth across the surface. Avoid holding the can in one spot for too long to prevent drips.
Compatibility:
- Surfaces: Compatible with most plastics (polystyrene, ABS, etc.) and metals commonly used in model making.
- Paints: Works as a base for acrylic, enamel, and oil-based paints. It is also resistant to these paint types once cured.
Care:
- Storage: Store the can upright in a cool, dry place, away from direct sunlight and heat sources.
- Nozzle Cleaning: After each use, turn the can upside down and spray for a few seconds to clear the nozzle and prevent clogging. If the nozzle becomes clogged, remove it and soak it in a suitable solvent (like cellulose thinner), then rinse and dry thoroughly before reattaching.