Twin Air Air Filter - KTM Husqvarna SX85 2013-2017 SXF 2011-2015 3 Pin

This filter is compatible with KTM SX85 (2013-2017), SX/SXF (125-450, 2011-2015), and EXC/EXC-F (125-500, 2012-2016) motorcycles with a 3-pin airbox.

The slightly smaller size is intentional to increase air space around the filter within the airbox, improving air circulation and leading to better engine performance.

Cleaning frequency depends on riding conditions. In dusty environments, inspect and clean after every ride. For cleaner conditions, cleaning may be needed less frequently, but regular inspection is always recommended.

While the adhesive is formulated to withstand gasoline, it is recommended to use dedicated Twin Air air filter cleaner or mild soap and water for optimal filter life and performance.

The thick, flat foam sealing ring ensures a complete and airtight seal against the airbox, preventing unfiltered air from entering the engine. It also acts as a breathable gasket, allowing some air passage for optimal flow.

The coarse outer foam layer traps larger dirt particles, while the finer inner foam layer captures smaller particles, ensuring maximum filtration while maintaining high airflow.

Yes, after cleaning and drying, the filter must be re-oiled with appropriate filter oil to ensure proper filtration and prevent small particles from passing through.

Ensure the airbox rim is clean and free of debris. Apply an even bead of filter grease to the sealing ring. Press the filter firmly and evenly around the entire rim to seat it.

Verify the filter is correctly installed and that the airbox is sealed. Check for any obstructions in the intake tract. Ensure the filter is clean and properly re-oiled if recently washed.

Use only dedicated air filter cleaner or mild soap and water. Avoid abrasive brushes or high-pressure washing. Handle the foam gently and allow it to air dry completely before re-oiling.