Shopping.co.uk

Mortar Spike - RHINOBUILD - RHINOGRIP

Mortar Spike - RHINOBUILD - RHINOGRIP

Use: Internal corners with use of 40mm, 50mm or 50.8mm profiles. Bar thread length: 80mm - with RH...

Best current price£10.00from www.rhino-build.com

Best offers

Shopping.co.uk recommended and popular offers

Lowest priceMost popular
www.rhino-build.com£10.00Visit shop

Rhinobuild Silver Zinc Plating Bricklayers Mortar Spike Zinc Plated

Visit shop

All Offers

2 offers from £10.00 - £11.00

View price history by clicking the chart icon.

www.rhino-build.comRhinobuild Silver Zinc Plating Bricklayers Mortar Spike Zinc Plated
Free delivery in 1–3 days
£10.00
Visit shop
B&QB&Q - Bricklayers Mortar Spike Zinc PlatedSilver Zinc Plating
Free delivery in 1–3 days
£11.00
Visit shop

Product Information

Full details

The RHINOBUILD RHINOGRIP Mortar Spike is designed for bricklayers needing a secure and adjustable way to fix profiles to internal corners. Its key benefit is the integrated RHINOGRIP thumbscrew, allowing for quick and firm attachment without extra tools, though it is specifically intended for use with 40mm, 50mm, or 50.8mm profiles.

All features

Model Part NumberRHINOGRIP
BrandRHINOBUILD

Extended Product Information

FAQs

What is the primary use of the RHINOGRIP Mortar Spike?

The RHINOGRIP Mortar Spike is primarily used for securing profiles or guides to internal corners in bricklaying, helping to maintain accuracy and alignment.

Can I use this tool with any profile size?

No, this tool is specifically designed for use with profiles that measure 40mm, 50mm, or 50.8mm in width.

Do I need any tools to attach the profile?

No, the integrated RHINOGRIP thumbscrew allows for secure, tool-free attachment of the profile to the clamp.

What material is the tool made from?

The tool is constructed from zinc-plated steel, offering superior corrosion resistance.

Is this tool suitable for external corners?

No, the RHINOGRIP Mortar Spike is designed specifically for internal corner applications.

Where is this product manufactured?

This range of bricklaying tools is designed and manufactured in Britain.

How should I clean and maintain the tool?

Clean off mortar and debris with a damp cloth after each use and store in a dry location to prevent rust. Avoid abrasive cleaners.

Troubleshooting

Thumbscrew is difficult to tighten or loosen.

Check the threads for debris or mortar. Clean the threads thoroughly and try again. If the issue persists, a small amount of lubricant may help.

Spike does not hold securely to the surface.

Ensure the spike is being used on a suitable, firm surface. Check that the spike itself is not damaged. For internal corners, ensure it is braced correctly against both walls.

Profile slips within the clamp.

Ensure the correct profile size is being used and that the RHINOGRIP thumbscrew is tightened as much as possible. Clean both the profile and the inside of the clamp for better grip.

Tool shows signs of rust.

This is typically due to prolonged exposure to moisture. Clean the rusted area with a wire brush and apply a protective coating or store the tool in a dry environment. Minor surface rust on zinc plating is often cosmetic.

Pros and Cons

Pros

  • Quick and easy tool-free adjustment with the RHINOGRIP thumbscrew.
  • Durable zinc-plated steel construction ensures long-term use and corrosion resistance.
  • Versatile compatibility with common profile sizes (40mm, 50mm, 50.8mm).
  • Manufactured in Britain with a focus on quality materials.
  • Specifically designed for stable internal corner applications.

Cons

  • Only suitable for internal corner applications.
  • Limited to use with specific profile sizes (40mm, 50mm, 50.8mm).
  • Bar thread length of 80mm may be restrictive for very thick or unusual profiles.
  • Primarily a single-purpose tool, not for general clamping needs.

Setup, Compatibility & Care

Setup:

  1. Select the appropriate profile size (40mm, 50mm, or 50.8mm).
  2. Slide the profile into the clamp opening of the RHINOGRIP Mortar Spike.
  3. Tighten the RHINOGRIP thumbscrew securely to ensure the profile is firmly fixed.
  4. Position the spiked end of the tool against the internal corner structure or a suitable support, ensuring stability.

Compatibility:

  • This tool is designed for use with internal corner applications.
  • It is compatible with profiles measuring 40mm, 50mm, or 50.8mm in width.
  • Ensure the surface or structure you are attaching the spike to is robust enough to provide a stable anchor point.

Care:

  • After use, clean the tool by removing any mortar or debris with a damp cloth.
  • Do not use abrasive cleaners, as they may damage the zinc plating.
  • Store the tool in a dry place to prevent corrosion.
  • Periodically check the thumbscrew and bar thread for smooth operation; a light application of lubricant can be used if necessary.

Price History

DatePrice
Visit shop