Best current price£14.19from Debenhams
Shopping.co.uk recommended and popular offers
Debenhams£14.19Visit shop Living And Home Unisex Green No-Dig L-Shaped Garden Edging With 30 Ground Pegs In | Size: Small
Visit shop3 offers from £14.19
View price history by clicking the chart icon.
The Living and Home No-Dig L-Shaped Garden Edging is designed for homeowners and professional landscapers looking to create clean, defined boundaries in their outdoor spaces without the labor of trenching. Its primary strength lies in its flexible, bendable material and simple installation process, making it ideal for curved flower beds or straight paths; however, users should note that the no-dig design relies heavily on ground condition, meaning extremely hard or rocky soil may require pre-loosening to seat the included pegs properly.
| Model Part Number | 0659046909909 |
|---|---|
| Brand | Living and Home |
Yes, the material is specifically designed to be flexible, allowing you to create smooth curves and circular borders.
Yes, the included pegs are calculated to provide sufficient anchoring for the length of the provided edging when installed according to the instructions.
Yes, the L-shaped profile is designed to be lawnmower-friendly, provided the edging is installed flush with the ground.
The material is designed for outdoor durability, though like any product exposed to direct sunlight, some minor UV weathering is normal over several years.
Yes, the material can be cut to your desired length using heavy-duty garden shears or a hacksaw.
Ensure the ground is level by removing high spots or rocks. If the material is cold, let it sit in the sun to lose its 'coil memory' before securing with pegs.
If the soil is too hard, use a screwdriver to create a pilot hole first, or moisten the area with water to soften the earth.
Add more pegs at the points where the edging curves, as these areas experience the most tension. Ensure the horizontal base of the 'L' is held down firmly.
To install, clear the area of debris and place the edging in your desired configuration. Use a rubber mallet to drive the provided ground pegs through the pre-allocated slots in the L-shaped base. If the ground is very dry or hard, moisten the soil slightly beforehand to make driving the pegs easier. For maintenance, a simple rinse with a garden hose is usually sufficient to remove dirt and grass clippings. Check the tension of the pegs once per season, especially after heavy rain or frost cycles, to ensure the edging remains firmly seated.
