D-C-Fix Premium Frosted Squares Static Cling Window Film - White, Geometric

No, this is a static cling film with no adhesive, meaning it can be removed easily without leaving residue and can be repositioned or reused.

Yes, as long as the glass surface of your shower screen is flat and smooth, this film can be used for added privacy.

Use plenty of water. Generously spraying the glass allows you to easily position the film and remove excess water and air bubbles effectively with a squeegee.

The frosted design provides privacy by obscuring direct views while still allowing light to pass through. It creates a frosted effect rather than full opacity.

This film offers 95% UV protection, which helps to prevent furnishings from fading and reduces glare.

Yes, the static cling nature allows the film to be removed and reapplied as needed, provided the glass and the film surface remain clean.

Simply wipe the film with a damp cloth. For tougher grime, a mild soap solution can be used, followed by a rinse with a damp cloth.

Ensure the glass was thoroughly cleaned and sprayed with sufficient water before application. Check that the 2mm gap was maintained and that the edges are not obstructed. If the film is dry, re-wet the glass and reapply.

Use a squeegee or smoother to firmly push out any remaining water and air bubbles towards the edges. If stubborn bubbles persist after drying, you may need to carefully lift that section of the film, re-wet the glass, and reapply, ensuring to squeegee thoroughly.

Use a sharp craft knife or a utility knife and a straight edge for precise cutting. Cut on a flat surface to ensure accuracy.

This film is designed for flat glass only. Textured glass can cause the film to not adhere properly or appear distorted. Remove the film and apply only to flat glass surfaces.