Jcp Fixings Spring Toggles With Screws - Silver - M5/14mm X 20mm

The weight limit depends on the wall material and application. These are designed for light to medium-duty use. Always test the fixture's stability before placing full load.

Yes, if the ceiling is constructed from plasterboard or drywall, these toggles can be used for lightweight ceiling applications.

You will need a drill with the appropriate drill bit size for the hole, a screwdriver (usually Phillips head), and potentially a tape measure and pencil for marking.

They are made from durable zinc-plated steel and Zamak 3 components for strength and corrosion resistance.

Each box contains 100 spring toggles with matching screws.

While they can be removed, the toggle may not function as effectively upon reinsertion, and the hole will be present. They are generally considered a permanent fixing solution.

Ensure the hole drilled is the correct size. If too small, the toggle may not open. If too large, it may not have enough material to grip.

The toggle may not have seated correctly, or the wall material might be too weak. Ensure the toggle is fully open and seated, and try a slightly longer screw if the wall material is thick.

The toggle is not properly anchored. Ensure the toggle wings have sprung open behind the board and are applying pressure. You may need to remove the screw and re-seat the toggle.