Best current price£14.53from eBay
Shopping.co.uk recommended and popular offers
eBay£14.53Visit shop Airfix A04067 - 1/72 Gloster Meteor F.8/FR.9 - New
Visit shopeBay£22.99Visit shop Airfix 04067 1:72 Gloster Meteor F.8/FR.9
Visit shop11 offers from £14.53 - £25.00
View price history by clicking the chart icon.
This 1:72 scale plastic model kit is for hobbyists interested in historical aircraft and detailed model building. It offers the key benefit of recreating two significant variants of Britain's first jet fighter, the Gloster Meteor F.8 and FR.9, with new decal options. A caveat is that this is a **plastic model kit requiring assembly and painting**, with separate adhesives, tools, and paints needed.
| Model Part Number | A04067 |
|---|---|
| Brand | Airfix |
This model kit is recommended for ages 14 and up due to the small parts, required tools, and assembly process.
You will need plastic cement (glue), hobby knife or sprue cutters, paints, brushes, and potentially decal setting solution and water.
The kit provides parts and decals to build either the F.8 or the FR.9 variant, but not both simultaneously from a single box.
The model is produced in a 1:72 scale, meaning one unit of measurement on the model represents 72 units on the actual aircraft.
No, paints are not included with the kit. They must be purchased separately.
Assembly time can vary greatly depending on the modeler's experience and the complexity of the kit, but it can range from several hours to multiple days of work, including painting and drying time.
Ensure all mold release agents have been cleaned off parts and that no excess plastic sprue material remains. Carefully trim or sand any rough edges. Consult the instruction manual for correct part orientation.
Ensure the model surface is smooth and gloss-coated before applying decals. Use a decal setting solution to help them conform to surface details. Apply decals gently with tweezers and a soft brush to smooth them down.
Ensure the plastic surface is clean and free from grease or dust. Apply a suitable primer before painting. Use paints specifically designed for plastic models and follow recommended drying times.
Use the correct type and amount of plastic cement. Apply sparingly to the joining surfaces only. Allow the cement to become slightly tacky before joining parts, rather than submerging them in liquid.
Setup: This is a plastic model kit that requires assembly. Begin by carefully removing parts from the sprue, following the instruction manual. Parts will need to be glued together using plastic cement (not included). Painting is essential, using acrylic or enamel paints suitable for plastic models (not included). Decals are applied using water and a decal setting solution (not included).
Compatibility: This model is a standalone kit and does not have electronic or digital compatibility. Its compatibility is with standard modeling tools, adhesives, and paints.
Care: Handle the finished model with care to avoid damaging delicate parts or paintwork. Dust the model periodically using a soft brush or a can of compressed air held at a distance. Avoid direct sunlight or high humidity, which can degrade paint and plastic over time.
