Best current price£22.18from Power Tools Direct
Shopping.co.uk recommended and popular offers
Power Tools Direct£22.18Visit shop Draper 02250 Spare Roller For 02171 Tyrolean Flicker Machine Each
Visit shop
B&Q£31.12Visit shop B&Q - Spare Roller For 02171 Tyrolean Flicker Machine 02250
Visit shop13 offers from £22.18 - £44.99
View price history by clicking the chart icon.
This Draper Spare Roller (02250) is designed for DIY enthusiasts and trade professionals applying Tyrolean and roughcast wall coatings. It offers a simple, hand-operated solution for texturing exterior and interior walls, providing a durable finish. A key benefit is its ease of use, allowing for consistent application. However, it is a spare part and requires the main Draper 02171 Tyrolean Flicker Machine to function.
| Model Part Number | 02250 |
|---|---|
| Brand | Draper |
No, this is a spare roller designed to be used with the Draper 02171 Tyrolean Flicker Machine. It is not a standalone tool.
This roller is intended for use with Tyrolean and roughcast wall coatings.
After detaching the roller from the machine, wash it thoroughly with water. Ensure all coating residue is removed from the tines and body. Allow it to air dry completely before storage.
Yes, this roller is suitable for applying coatings on both exterior and interior walls.
The adjustable ratchet pressure bar allows you to control the pressure applied to the mixture, influencing how forcefully the coating is flicked onto the wall and thus affecting the texture.
The lifespan of the roller depends on the frequency and intensity of use. Replace it when you notice significant wear, damage, or a decline in its performance in flicking the coating.
The Draper 02171 Tyrolean Flicker Machine can typically be purchased from authorized Draper tool suppliers and major hardware retailers.
Check the consistency of your wall coating mixture; it may be too thick or too thin. Ensure the adjustable ratchet pressure bar is set correctly. Verify that the sprung tines are clean and free from dried material.
Ensure the spindle on the main machine is clean and free of obstructions. If removing an old roller, check for dried coating that might be binding it. Gently wiggle the roller while pulling or pushing.
Reduce the setting on the adjustable ratchet pressure bar. Ensure you are holding the sprayer at the recommended distance from the wall. The coating mixture might be too watery.
Confirm the roller is securely attached to the spindle. Check for any damage to the roller or the spindle mechanism.
Setup: This roller is a replacement part for the Draper 02171 Tyrolean Flicker Machine. To set up, ensure the main machine is clean and free from debris. Remove the old roller, if applicable, by carefully sliding it off the spindle. Align the new Draper Spare Roller (02250) with the spindle and slide it into place until it is securely seated. Ensure the adjustable ratchet pressure bar is correctly positioned for your desired coating application.
Compatibility: This roller is specifically designed as a spare part for the Draper 02171 Tyrolean Flicker Machine. It is not compatible with other models or brands of wall coating sprayers.
Care: After each use, it is vital to clean the roller thoroughly to prevent the wall coating mixture from drying and hardening. Remove the roller from the machine. Wash it with water, ensuring all residue is removed from the sprung tines and the roller body. Allow it to dry completely before storing. Store in a clean, dry place away from direct sunlight and extreme temperatures.
