Lenovo ThinkStation eSATA Cable - 0.77m Black
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This Lenovo ThinkStation Front eSATA Cable is designed for users of ThinkStation P500, P700, and P900 systems who need to connect external SATA devices to the front of their workstation. Its key benefit is providing convenient front-panel access to eSATA ports for faster data transfer compared to USB 2.0. A potential caveat is that it requires installation into a specific 5.25" Flex Module, limiting its placement.
All features
| Model Part Number | 4X90H04223 |
|---|---|
| Brand | Lenovo |
Extended Product Information
FAQs
What ThinkStation models is this eSATA cable compatible with?
This cable is fully compatible with ThinkStation P500, P700, and P900 systems.
Do I need any other parts to install this cable?
Yes, this cable is designed to be installed in the ThinkStation 5.25" Flex Module (Part Number: 4XF0G94538).
What type of connection does this cable provide?
It provides an eSATA (external SATA) connection, specifically using the SATA I standard.
What is the length of the cable?
The cable length is 0.77 meters (approximately 2.5 feet).
Can I use this cable with any external hard drive?
You can use it with any external drive that features an eSATA connector.
Is this cable suitable for very high-speed external SSDs?
The cable uses the SATA I standard, which offers less bandwidth than newer SATA III or modern USB/Thunderbolt standards. It is suitable for general external storage but may bottleneck very high-speed SSDs.
What is the color of the cable?
The cable is black.
Troubleshooting
External drive not recognized
Verify the eSATA cable is securely connected at both the front panel and internal system/Flex Module. Ensure the external drive is powered on and functioning. Check if the drive is formatted and recognized in Disk Management.
Intermittent connection or slow transfer speeds
Inspect the cable for any visible damage. Ensure the connectors are clean. Try a different eSATA port on the front panel or an alternative eSATA cable if available to rule out cable failure.
Cable does not fit into the Flex Module
Confirm you are using the correct ThinkStation 5.25" Flex Module (4XF0G94538). Ensure the cable's internal connector is aligned correctly with the module's port before attempting to connect.
Pros and Cons
Pros
- Provides convenient front-panel access for external SATA devices.
- Ensures a secure and reliable connection for data transfer.
- Designed specifically for compatibility with ThinkStation P500, P700, and P900 models.
- Offers a clean internal installation when used with the recommended Flex Module.
- Shorter cable length is suitable for internal routing without excessive slack.
Cons
- Requires a specific 5.25" Flex Module (4XF0G94538) for installation.
- Limited to eSATA devices; not compatible with standard SATA drives without an adapter.
- SATA I standard may be slower than newer SATA III standards for high-performance drives.
- Only compatible with specific ThinkStation models (P500, P700, P900).
Setup, Compatibility & Care
Compatibility: This cable is exclusively designed for Lenovo ThinkStation systems, specifically the P500, P700, and P900 models. It is intended for installation within the ThinkStation 5.25" Flex Module (Part Number: 4XF0G94538).
Setup:
- Ensure your ThinkStation is powered off and unplugged.
- Install the 5.25" Flex Module into the appropriate bay.
- Route the eSATA cable from the internal connection point within the Flex Module to the front panel port.
- Connect the internal end to the motherboard's eSATA header (if available) or the designated port on the Flex Module.
- Connect the external eSATA connector to your external storage device.
Care:
- Keep connectors clean and free of dust. Use compressed air if necessary.
- Avoid bending the cable sharply, which can damage internal wiring.
- Ensure the cable is securely connected at both ends.