Best current price£5.08from Demon Tweeks
Shopping.co.uk recommended and popular offers
Demon Tweeks£5.08Visit shop Automotive Plumbing Solutions Male To Male Adaptor BSP - Metric - 3/4 Inch BSP To M20 X 1.50, Plated Steel, Silver
Visit shop3 offers from £5.08 - £9.24
View price history by clicking the chart icon.
The Automotive Plumbing Solutions M20 x 3/4 BSP Male to Male Adaptor is designed for professional mechanics and automotive enthusiasts needing to bridge metric and British Standard Pipe thread systems in custom fluid circuits. It provides a robust, corrosion-resistant connection for high-pressure applications, though users must note that it requires additional sealing washers to achieve a guaranteed leak-free seal.
| Model Part Number | 523 |
|---|---|
| Brand | Automotive Plumbing Solutions |
No, sealing washers are sold separately and are highly recommended for a leak-free installation.
This component is designed for automotive plumbing; however, always ensure the pressure rating of the adaptor meets or exceeds the specific requirements of your fuel system.
Use a standard flare nut wrench or an open-ended wrench. Be careful not to overtighten, which can damage the threads or the seat.
Generally, specialized brake-rated fittings are required for brake lines. Please verify your local safety regulations before using this in a braking circuit.
The adaptor is made of steel with a silver-colored plated finish designed to resist corrosion.
Ensure a compatible sealing washer is installed at the contact point and re-torque the fitting.
Verify that you are not cross-threading; back the fitting out and confirm that the thread pitches (M20 and 3/4 BSP) match your components exactly.
Clean the area with a mild solvent and apply a light coat of anti-corrosion spray to protect the plated finish.
To install, ensure both mating surfaces are clean and free of debris. Always use an appropriate sealing washer between the fitting face and the receiving port to ensure a hydraulic seal, as the threads alone are not intended to prevent fluid leakage. When tightening, use a properly sized flare nut wrench to avoid marring the finish. Periodically inspect the silver plating for any signs of surface wear if the part is exposed to harsh road debris or high-heat environments. Avoid using aggressive chemicals that could compromise the plated finish.
