Osram H11B 12V 55W



Best current price£21.89from eBay
Best offers
Shopping.co.uk recommended and popular offers
eBay£21.89Visit shop Bulb PGJY19-2 H11B 64241 OSRAM
Visit shop


Best current price£21.89from eBay
Shopping.co.uk recommended and popular offers
eBay£21.89Visit shop Bulb PGJY19-2 H11B 64241 OSRAM
Visit shop2 offers from £21.89 - £24.95
View price history by clicking the chart icon.
The Osram Original Line H11B 64241 is designed for vehicle owners seeking a reliable, high-quality replacement for factory-standard fog, low-beam, or high-beam lighting. It offers an excellent balance between brightness and durability, providing a crisp 1350-lumen output for improved visibility; however, users should note that as a standard halogen bulb, it lacks the extended lifespan of modern LED or HID alternatives.
| Model Part Number | 64241 |
|---|---|
| Brand | OSRAM |
No, the H11B uses a PGJY19-2 base which is physically distinct from a standard H11 base. You must use the specific H11B version.
No, you should stick to the rated 55W. Exceeding this can damage the vehicle's headlight wiring and plastic housing due to excess heat.
The average lifespan is up to 580 hours, though this can vary based on voltage stability and driving conditions.
The standard package contains 1 piece in a blister pack.
Yes, provided your vehicle's headlamp assembly is designed for the H11B fitment for those functions.
Ensure the electrical connector is fully clicked into the PGJY19-2 base and that the base is locked securely in the housing.
Check if the glass was touched by bare fingers during installation; clean the bulb surface with isopropyl alcohol if necessary.
Before installation, verify that your vehicle manual explicitly calls for an H11B (PGJY19-2 base) bulb, as this is a specific socket type that is not interchangeable with standard H11 bulbs. To install, access the rear of your headlight assembly, remove the dust cover, and rotate the bulb to unlock it. Crucial Care Tip: Always handle halogen bulbs with clean gloves or a lint-free cloth. Oils from bare skin can create hot spots on the glass surface, significantly reducing the bulb's lifespan or causing premature failure. Ensure the bulb is locked firmly into the socket to maintain water-tight seals.