Bahco Replacement Scraper Blade - MPN: 625
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This guide is for DIY enthusiasts and professionals needing to efficiently remove stubborn materials like paint, glue, varnish, and rust. The Bahco Replacement Scraper Blade (MPN: 625) offers superior durability with carbide edges that last significantly longer than steel, providing a smooth finish without scratching. A key caveat is ensuring compatibility with specific Bahco scraper models.
All features
| Model Part Number | 625 |
|---|---|
| Brand | Bahco |
Extended Product Information
FAQs
How long do these carbide blades typically last?
Bahco carbide-edged blades are designed to last up to 50 times longer than conventional steel blades under normal use, offering exceptional longevity.
Can I use these blades on materials other than paint, glue, varnish, and rust?
While primarily designed for paint, glue, varnish, and rust removal, they can be effective on other hardened residues. However, they are not intended for soft materials like silicone or for cutting wood.
Are the blades reversible?
Yes, the blades are double-edged and designed to cut effectively on both pull and push strokes.
What is the length of the blade?
The blade length is 65mm.
Do I need any special tools to change the blade?
Typically, you will only need the Bahco scraper itself to loosen and tighten the locking mechanism holding the blade in place.
How should I dispose of old blades?
Old blades should be handled with care due to their sharp edges. Dispose of them according to local regulations for metal waste.
Can these blades be sharpened?
Carbide blades are extremely hard and difficult to sharpen with standard tools. Their lifespan is generally utilized until replacement is necessary rather than resharpening.
Troubleshooting
Blade not cutting effectively
Ensure the blade is properly secured in the scraper. Check if the blade is installed with the correct edge facing the material. If the blade is dull or damaged, replace it with a new one.
Blade causes scratching
Verify that the convex ground edges are being utilized correctly. Ensure no debris is caught on the blade's edge. The blade may be damaged; inspect for nicks and replace if necessary.
Difficulty fitting blade to scraper
Confirm you are using a compatible Bahco scraper model (625, 650, or 665). Ensure no debris is obstructing the blade slot in the scraper head. The blade itself may have manufacturing tolerances; try a different blade if available.
Pros and Cons
Pros
- Exceptional longevity due to carbide construction, reducing replacement frequency.
- Versatile performance on both push and pull strokes.
- Minimizes surface damage thanks to specially designed edges.
- Effective for a broad spectrum of common removal tasks.
- Safer operation by eliminating the need for heat.
- Ensures optimal fit and performance with compatible Bahco tools.
Cons
- Requires compatible Bahco scraper models (625, 650, 665).
- Carbide blades can be more brittle than steel if subjected to extreme impact.
- Not designed for cutting soft materials like silicone sealants.
- Replacement cost per blade may be higher than basic steel blades, though lifespan offsets this.
Setup, Compatibility & Care
Setup:
- Ensure your Bahco scraper is the compatible model: 625, 650, or 665.
- Carefully unpackage the new blade, handling the sharp edges with caution.
- Loosen the screw or locking mechanism on your scraper handle.
- Remove the old blade, noting its orientation.
- Insert the new Bahco 625 blade, ensuring it sits securely and is correctly aligned.
- Tighten the scraper's locking mechanism firmly.
Compatibility:
- Bahco Scraper Model 625
- Bahco Scraper Model 650
- Bahco Scraper Model 665
Care:
- After each use, clean the blade by wiping off any residue with a dry or slightly damp cloth. Avoid using abrasive cleaners.
- Store the blade in a dry place, preferably in its original packaging or a protective sleeve, to prevent corrosion and damage.
- Regularly inspect the blade for any signs of wear or damage. Replace if edges become chipped or significantly dull.