Setup, Compatibility & Care
Compatibility:
The Pure Loop 3 280mm is compatible with a wide array of modern CPU sockets, including:
- Intel: LGA 1851, LGA 1700, LGA 1200, LGA 1151, LGA 1155, LGA 1150
- AMD: Socket AM5, Socket AM4
Setup:
- Preparation: Ensure your PC case has sufficient space for a 280mm radiator and compatible mounting points. Gather the necessary tools (usually a screwdriver).
- Mounting Bracket: Install the appropriate mounting bracket for your CPU socket onto the motherboard.
- Pump Unit: Apply a small amount of thermal paste to the CPU (if not pre-applied) and attach the pump unit to the CPU, securing it with the provided screws or clips.
- Radiator and Fans: Mount the 280mm radiator to your case's designated radiator mounting location (e.g., top, front, or side). Attach the two 140mm fans to the radiator.
- Connections: Connect the fan cables to the motherboard's CPU_FAN header and the pump's power cable to a suitable power connector (often SATA).
- Cable Management: Tidy up all cables for optimal airflow and aesthetics.
Care:
- Dusting: Regularly clean the radiator fins and fan blades with compressed air to maintain optimal airflow and prevent overheating.
- Coolant Level: Periodically check the coolant level via the refill port. If the level is low, use a compatible coolant (not included) to top it up. Refer to the manual for specific instructions.
- Cleaning: The exterior of the cooler and radiator can be wiped down with a slightly damp, lint-free cloth. Avoid using harsh chemicals.