Everbuild EpoxySET 105 Standard 14kg - EPOX10514

It can be used on concrete, screeds, stone, brick, and steel.

Curing times vary depending on ambient temperature. Refer to the product data sheet for specific times, but typically it requires several hours before light foot traffic and longer for full load-bearing capacity.

Yes, its resistance to chemicals and abrasion makes it suitable for exterior repairs like steps and kerbs, provided the application and curing conditions are appropriate.

Please refer to the packaging for the specific expiry date. Store in a cool, dry place as recommended by the manufacturer.

For porous surfaces, a primer may be recommended to ensure optimal adhesion and prevent rapid loss of plasticiser. Consult the product's technical data sheet for specific guidance.

While it provides a strong repair, its primary function is structural. For purely cosmetic finishes on non-critical areas, other products might be more suitable, though EpoxySET 105 can be smoothed to a reasonable finish.

The ambient temperature may be too low, slowing down the chemical reaction. Try to work in a warmer environment if possible. Ensure components are thoroughly mixed.

Check that all three components were mixed in the correct proportions and thoroughly blended. Ensure the correct epoxySET 105 components were used.

The substrate may not have been adequately prepared. Ensure it was clean, dry, and free from contaminants. Mechanical preparation (e.g., grinding) might be necessary for optimal adhesion.

Work faster to achieve a smoother finish before the material starts to set, or use the finishing solvent and appropriate tools during the application window.