Best current price£5.75from Power Tools Direct
Shopping.co.uk recommended and popular offers
Power Tools Direct£5.75Visit shop Sealey Ak6004q 100Mm G-Clamp Quick Release
Visit shop
B&Q£10.14Visit shop B&Q - 100mm G-Clamp Quick Release Mechanism Swivel Tip Forged Body Ak6004Q
Visit shop14 offers from £5.75 - £21.95
View price history by clicking the chart icon.
This Sealey 100mm Quick Release G-Clamp (AK6004Q) is designed for DIY enthusiasts and woodworkers needing a reliable and fast-acting clamping solution. Its key benefit is the quick-release mechanism, enabling swift adjustments for faster project assembly. A potential caveat is that the forged body, while durable, may require careful handling to avoid marring delicate surfaces without the swivel tip engaged.
| Model Part Number | AK6004Q |
|---|---|
| Brand | Sealey |
The Sealey AK6004Q G-Clamp has a maximum jaw opening of 100mm (approximately 4 inches).
The throat depth, which is the distance from the front of the frame to the center of the screw, is 65mm.
The quick-release mechanism allows you to rapidly open or close the clamp jaws by disengaging the main screw thread with a lever, enabling fast adjustments without manually turning the screw completely.
Yes, the clamp can be used on metal, but care should be taken to avoid scratching or damaging the surface, especially if clamping tightly. The swivel tip helps mitigate marking.
The clamp body is made from a durable forged steel.
The swivel tip is generally designed to be a permanent part of the screw. If it becomes significantly damaged, replacement of the clamp might be the most practical solution.
Regular cleaning after use and occasional lubrication of the threaded screw with light machine oil will ensure smooth operation and prevent rust, prolonging the tool's lifespan.
Check the threaded screw for debris, dirt, or rust. Clean the threads thoroughly and apply a light lubricant. Ensure the quick-release mechanism is not obstructed.
Gently tap the lever mechanism to dislodge any potential obstructions. Ensure no debris is caught in the release slot. If the issue persists, a small amount of penetrating oil may help, followed by thorough cleaning.
Inspect the swivel tip for damage. If it is loose, attempt to tighten it if possible. If significantly damaged, replacement may be necessary, though this is uncommon with typical use.
Ensure the threaded screw is tightened sufficiently. Check that the workpiece surface is flat and stable. Verify that the clamp is not being used beyond its intended capacity or for inappropriate materials.
Setup: The Sealey G-Clamp requires no assembly. It is ready for immediate use out of the package. Ensure the threaded screw mechanism is clean and free of debris before operation.
Compatibility: This clamp is designed for general woodworking, carpentry, and DIY tasks. It is compatible with wood, plastic, and metal materials of appropriate thickness within its jaw capacity. It is not intended for high-precision engineering applications requiring extreme accuracy.
Care:
