Fiddes Wood Reviver Gel - 2.5L - Restore Grey Weathered Wood

No, the Fiddes Wood Reviver Gel is designed for bare wood. All previous finishes must be completely removed before application.

Refer to the specific instructions on the product label for the recommended dwell time, as this can vary. Always test on a small area first.

You should wear protective goggles, gloves, and clothing to avoid skin and eye contact.

Ensure the wood is clean, dry, and free from any previous finishes, dirt, or moss. Do not use a pressure washer.

Yes, it is a water-based, odourless, and biodegradable gel.

Cover all decorative stone, metallic components, and plants thoroughly to protect them from splashes during application and rinsing.

The need for reapplication depends on the wood's exposure to the elements and the desired level of restoration. Check the wood periodically and reapply as needed.

Ensure the gel was applied evenly and allowed sufficient dwell time. For heavily weathered wood, a second application may be necessary. Ensure surface preparation was thorough.

Ensure the product is applied at an appropriate temperature (warm conditions recommended). If the wood is very porous, it may absorb the gel more quickly. Apply a second coat if needed after the first rinse and dry.

Rinse the surface thoroughly with clean water. Ensure all product has been removed. If stubborn residue persists, gently scrub again with water and rinse. Ensure all protective coverings were removed before final rinse.

Ensure the gel was applied with consistent pressure and coverage using the brush. Uneven application can lead to streaking. A second, even coat might resolve this.