Einhell Power X-Change 18V Cordless Stapler Gun Tacker - 2x 2.5Ah Kit + Case

This stapler is designed for 18 Gauge staples that are 5.7mm wide and can range from 10mm to 38mm in length.

Yes, this kit requires a compatible Einhell 18V Power X-Change battery and charger, which are not included in this specific package. They can be purchased separately or may be part of another Power X-Change tool kit.

The magazine has a capacity of up to 100 staples.

The adjustable impact depth allows you to control how deep the staple is driven into the material, which is useful for preventing damage to delicate surfaces or ensuring a secure hold in harder materials.

Yes, the stapler features a switchable trigger that allows you to select between single shot for precise placement and series shot for faster stapling.

PressAir technology means the stapler operates without the need for a separate compressor or air hose, offering maintenance-free operation and eliminating ongoing costs associated with air supply.

No, the rubberised side surfaces are designed to prevent scratching of the workpiece, offering protection during use.

Ensure the battery is correctly inserted and charged. Check that the staple magazine is loaded and closed properly. Verify that the nose of the stapler is pressed firmly against the workpiece to activate the safety mechanism.

Adjust the impact depth to a higher setting. Ensure you are using the correct staple length and width. Check for any obstructions in the staple channel.

Open the magazine and carefully remove the jammed staples. Ensure staples are loaded correctly and are not bent. Ensure you are using compatible staple sizes.

Check the battery charge level; a low battery can reduce power. Ensure the impact depth is not set too high for the material. Clean any debris from the staple ejection port.