Best current price£241.50from OnBuy.com
Shopping.co.uk recommended and popular offers
OnBuy.com£241.50Visit shop (Bronze, Grey) Cantilever Door Canopy | 2000Mm Wide X 650Mm Projection 8800227705274
Visit shop1 offer from £241.50
View price history by clicking the chart icon.
The Birchwood Trading Canofix Cantilever Doorway Canopy is designed for homeowners seeking a stylish, easy-to-install solution to protect their entrance from the elements. Its 2000mm width and 650mm projection offer substantial coverage, while the bronze finish adds a modern aesthetic. A key benefit is its DIY-friendly cantilever design, reducing installation complexity. However, careful wall preparation is crucial for secure mounting.
| Colour | Bronze |
|---|---|
| Brand | Birchwood Trading |
Typically, you will need a drill, appropriate drill bits for your wall type, a level, a tape measure, a screwdriver or wrench set, and potentially a stud finder. Always refer to the product's specific installation manual.
The included hardware usually consists of the canopy and bracket. Specific wall fixings (screws, anchors) are often not included, as the correct type depends on your wall construction (e.g., brick, concrete, wood). You will need to supply these separately.
Clean the bronze sheet and grey bracket using a soft, damp cloth with mild soap. Rinse thoroughly and dry with a clean cloth. Avoid abrasive cleaners.
Warranty information can vary. Please consult the product packaging or the manufacturer's website for the most accurate and up-to-date warranty details.
Installation is recommended on solid, load-bearing walls. Installation on structures like mobile homes or sheds may not be suitable due to their construction and may require professional assessment and specialized fixings.
The canopy is designed with an integrated slope to ensure water runoff. Refer to the installation guide for the specific angle and ensure it's mounted correctly to facilitate drainage away from the building.
Check that all mounting screws are securely tightened. Ensure the canopy sheet is properly seated on the bracket.
Verify the canopy is installed with the correct slope for water runoff as per the installation guide. Ensure the bracket is level.
Use a stud finder to locate studs. If mounting on solid masonry, ensure correct drill bit and anchors are used for a secure fit.
Re-examine the bracket mounting. Ensure it is flush against the wall. A small amount of sealant might be used in specific circumstances, but check manufacturer recommendations first.
Setup:
Compatibility:
Care:
