Lithofin Kf Grout Protector - 500 Ml
Best current price£31.90from B&Q
Best offers
Shopping.co.uk recommended and popular offers
B&Q£31.90Visit shop B&Q - Kf Grout Protector 500 Ml For Porous Grouting
Visit shopB&Q£31.90Visit shop One Offer
1 offer from £31.90
View price history by clicking the chart icon.
Product Information
Full details
The Lithofin KF Grout Protector is for homeowners and contractors seeking to maintain clean and protected grout lines in tiled areas. Its key benefit is creating an invisible barrier that repels water, oil, and grease, significantly simplifying cleaning and preventing stains. A potential consideration is that it may cause slight darkening of the grout. This ready-to-use, solvent-free impregnator offers deep penetration for durable protection against common household spills.
All features
| Model Part Number | KF Grout Protector |
|---|---|
| Brand | lithofin |
Extended Product Information
FAQs
How often should I reapply Lithofin KF Grout Protector?
The frequency of reapplication depends on the level of wear and cleaning. For heavily trafficked areas or frequent cleaning, reapplication every 6-12 months is recommended. Always ensure the grout is clean and dry before reapplying.
Can I use this on epoxy grout?
No, Lithofin KF Grout Protector is specifically formulated for porous, cement-based grouts. It is not designed for epoxy or other non-porous grout types.
Does it seal the tile itself?
No, this product is designed exclusively for grout lines. It does not seal the tile surface.
What is the coverage rate?
The coverage is approximately 10 m² per liter, but this refers to the grout lines only, not the tile surface.
Will this product change the color of my grout?
The product is designed to not alter the surface appearance significantly. However, it may cause a slight darkening of the grout color. Always test in a small, hidden area first.
Is it safe to use indoors?
Yes, the product is solvent-free and does not produce strong chemical odors, making it suitable for indoor use.
How long does it take to dry/cure?
Allow the treated grout to cure fully before exposing it to moisture or heavy use, which typically takes 24-48 hours. Refer to the product packaging for specific cure times.
Troubleshooting
Product leaves visible residue on tiles.
Wipe away excess product immediately after application with a clean, damp cloth. If residue has dried, a specialized tile cleaner might be required.
Grout appears significantly darker than expected.
Test in an inconspicuous area first. If darkening is undesirable, discontinue use and consult Lithofin product recommendations for alternatives. Ensure no excess product was left to dry on the surface.
Product does not seem to be repelling water.
Ensure the grout was completely dry before application and that the product was applied correctly according to instructions. The protection may take some time to fully cure. Reapplication might be needed if the original grout was heavily saturated or damaged.
Application is difficult due to thick consistency.
The product is designed to be low viscosity. If it appears thick, ensure it has not been exposed to extreme temperatures. Stir gently if necessary. Apply carefully to grout lines.
Pros and Cons
Pros
- Effectively repels water, oil, and grease.
- Prevents difficult stains from setting into grout.
- Easy to apply and requires no mixing.
- Solvent-free formula is safer for indoor environments.
- Helps maintain the aesthetic of tiled surfaces.
- Simplifies routine cleaning and maintenance.
Cons
- May cause a slight darkening of the grout color.
- Primarily designed for cement-based grout; compatibility with other types should be verified.
- Coverage is for grout lines only, not the tile surface.
- Requires a clean and dry surface for optimal application.
Setup, Compatibility & Care Instructions
Setup:
- Ensure the grout lines are clean, completely dry, and free from any existing sealants or residues.
- Test the product on an inconspicuous area first to check for any color change.
- Apply the Lithofin KF Grout Protector directly from the bottle onto the grout lines. Use a brush or a clean cloth for precise application if needed.
- Allow the product to penetrate for the recommended time (refer to product packaging for specific dwell times).
- Wipe away any excess product from the tile surface immediately with a clean, damp cloth. Do not allow product to dry on the tile surface.
- Allow the treated grout to cure fully before exposing it to moisture or heavy use (typically 24-48 hours).
Compatibility:
- Designed for porous, cement-based grout lines.
- Not intended for use on epoxy grout, non-porous grouts, or the tile surface itself.
Care:
- Clean treated grout lines with mild, pH-neutral cleaners.
- Avoid harsh abrasive cleaners or strong chemicals that can degrade the protective treatment.
- Reapplication may be necessary over time, depending on traffic and cleaning frequency.