Eheim Sealing Ring - 2215,2032,2034, 2036 7314058

This sealing ring (7314058) is compatible with Eheim Ecco, Ecco Comfort, and Ecco Pro external filters, specifically models 2215, 2231/33/35, 2232/34/36, and 2032/34/36.

It's recommended to inspect the sealing ring during routine filter maintenance (e.g., every 3-6 months). Replace it if you notice any signs of wear, such as cracks, brittleness, or deformation, or if you experience leaks.

While generic rings might seem like an option, using the official Eheim sealing ring ensures a precise fit and the correct material properties for optimal performance and safety, preventing leaks and maintaining filter efficiency.

No, typically no special tools are required. You will need to unlatch the filter head, remove the old seal, clean the surfaces, and install the new seal by hand. A small amount of water or aquarium-safe lubricant can help with installation.

If leaks persist, double-check the seal's seating, ensure no debris is present on the mating surfaces, and confirm the filter head is correctly aligned and latched. You may also want to verify that the filter model is indeed compatible with this specific seal.

Yes, lightly lubricating the seal with water or a small amount of aquarium-safe silicone grease can help it seat properly and create a better initial seal.

Ensure the new seal is correctly seated in its groove and is not twisted. Verify that the filter head and canister are properly aligned and securely latched. Check for any debris on the sealing surfaces that might prevent a complete seal. Ensure you are using the correct seal for your specific filter model.

Lightly moisten the seal with water or a small amount of aquarium-safe silicone grease. Ensure you are installing it in the correct orientation within the designated groove.

Double-check that the seal is fully seated within its groove and that no part of it is obstructing the latch mechanism. Ensure the filter head is correctly positioned on the canister.